Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

GW Instek MSO-2202EA - 200MHz, 2-channels, Digital Storage Oscilloscope, 16-channel LA, dual channel 25MHz AFG

200MHz, 2-channels, Digital Storage Oscilloscope, 16-channel LA, dual channel 25MHz  AFG

GW Instek

Category : Oscilloscopes

$1,800 (USD) Add to Cart

Documents:
Users Manual Brochure PC Software USB Driver LabVIEW Driver

Overview
Features
Information
Calibration

Economical and Multi-Functional MSO

The MSO-2000 series is a mixed-signal oscilloscope, which offers dual analog channels + 16 digital channels or 4 analog channels + 16 digital channels. The MSO-2000 series includes MSO-2000E and MSO-2000EA. MSO-2000E has a built-in 16-channel logic analyzer and MSO-2000EA has a built-in 16-channel logic analyzer and a dual channel 25MHz arbitrary waveform generator. The entire series features bandwidth selections of 200MHz, 100MH, and 70MHz. Dual analog channel models provide 1GSa/s real-time sampling rate per channel; four analog channel models provide 1GSa/s maximum real-time sampling rate. The 8-inch 800*480 TFT LCD and the minimum 1mV/div vertical range allow the MSO-2000 series to measure complex feeble signals and clearly display measurement results.

For analog channels, the MSO-2000 series provides 10M long memory for users to completely retrieve and analyze waveforms. Users, based upon the application requirements, can select 1k, 10k, 100k, 1M or 10M memory depth. Short memory depth collocating with the high sampling rate allows users to observe fast-changing waveforms and, on the other hand, long memory depth aims for continuously changing waveforms. The MSO-2000 series is equipped with waveform search and segmented memory functions to expand the flexible applications of 10M long memory. The segmented memory can be divided the maximum into 29,000 sections for users to bypass any unimportant waveforms so as to swiftly search all required waveforms. With the segmented memory function, more meaningful waveforms can be saved and target waveforms can be displayed rapidly. Users, by using the waveform search function, can rapidly search desired waveforms according to the required trigger conditions.

 


CAN Bus Trigger and Decode

16-channel logic analyzer has a memory depth of 10Mpts per channel, which can retrieve more and longer digital signals as well as clearly display digital signals to obtain sufficient information for analysis. The minimum input swing of logic analyzer represents the minimum operating voltage of ±250 mV, which demonstrates that digital channels are highly sensitive with respect to input. The standard bus trigger and decoding functions include serial and parallel bus such as I2C, SPI, UART (RS232/422/485) and CAN/LIN bus for automotive communications. The parallel bus function is only for digital channels. Bus waveforms can be triggered and decoded in real time. The MSO-2000 series offers complete analysis and debugging capabilities with the economical pricing.


Dual Channel Arbitrary Waveform Generator

In addition to a 16-channel logic analyzer, MSO-2000EA has a built-in dual channel 25MHz arbitrary waveform generator with the modulation capability and also features 14 bits vertical resolution; sample rate of 200MSa/s; 5 standard output waveforms (Sine, Square, Pulse, Ramp, DC, Noise) and 7 user-defined waveforms (Sinc, Gaussian, Lorentz, Exponential Rise, Exponential Fall, Haversine, Cardiac); AM/FM/FSK modulation and sweep function. The user friendly interface is the ideal choice for applications such as circuit simulation and education tests.

  • 200/100/70MHz bandwidth selections: 2 or 4 channels
  • MSO-2000E equips with a 16-channel logic analyzer
  • MSO-2000EA equips with a 16-channel logic analyzer and a dual channel 25MHz arbitrary waveform generator
  • Real time sample rate for each channel is 1GSa/s (2-channel models);Maximum real time sample rate is 1 GSa/s (4- channel models)
  • Maximum 10M memory depth and VPO waveform display technology
  • Waveform update rate up to 120,000 wfms/s
  • 8 ” WVGA TFT LCD screen display
  • Maximum 1M FFT provides higher frequency domain resolution measurements
  • High Pass, Low Pass and Band Pass Filter Functions
  • 29,000 segmented memory sections and waveform search function
  • I2C/SPI/UART/CAN/LIN serial bus trigger and decoding functions
  • Data log function is able to track signal changes up to 100 hours
  • Network storage function
Channels 2ch+Ext
Bandwidth DC~200MHz (-3dB)
Rise time 1.75ns
Bandwidth Limit 20M/100MHz

Vertical Sensitivity

Resolution 8 bit
:1mV~10V/div
Input Coupling AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
DC Gain Accuracy ±(3%)when 2mV/div or greater is selected
±(5%)when 1mV/div is selected;
Polarity Normal & Invert
Maximum Input Voltage 300Vrms, CAT I
Offset Position Range 1mV/div ~ 20mV/div : ±0.5V
50mV/div ~ 200mV/div : ±5V
500mV/div ~ 2V/div : ±25V
5V~10V/div : ±250V
Waveform Signal Process +, -, ×, ÷, FFT, FFTrms ,User Defined Expression.

FFT:1Mpts
FFT:Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or Blackman-Harris.

Trigger

Source CH1 ,CH2, CH3, CH4, Line, EXT*
*dual channel models only
Trigger Mode Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Trigger Type Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate,tme out, Event-Delay(1~65535 events), Time-Delay(Duration,4nS~10S), Bus
Holdoff range 4ns~10s
Coupling AC,DC,LF rej. ,HF rej. ,Noise rej.
Sensitivity 1 div

External Trigger

Range ±15V
Sensitivity DC ~ 100MHz Approx. 100mV
100MHz ~ 200MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF

Horizontal

Time base Range 1ns/div ~ 100s/div (1-2-5 increments)
ROLL: 100ms/div ~ 100s/div
Pre-trigger 10 div maximum
Post-trigger 2,000,000 div maximum.
Time base Accuracy ±50 ppm over any ≥ 1 ms time interval
Real Time Sample Rate Max.:1GSa/s (4ch model)
Per channel 1GSa/s (2ch model)
Record Length Max:10Mpts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection 2ns (typical)
Average selectable from 2 to 256

X-Y Mode

X-Axis Input Channel 1; Channel 3*
*four channel models only
Y-Axis Input Channel 2; Channel 4*
*four channel models only
Phase Shift ±3° at 100kHz

Cursors and Measurement

Cursors Amplitude, Time, Gating available;Unit:Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%)
Automatic Measurement 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase ,Cursor measurements

Control Panel Function

Auto counter 6 digits, range from 2Hz minimum to the rated bandwidth
Autoset Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo Autoset
Save Setup 20set
Save Waveform 24set

Display

TFT LCD Type 8" TFT LCD WVGA color display
Display Resolution 800 horizontal × 480 vertical pixels (WVGA)
Interpolation Sin(x)/x
Waveform Display Dots, vectors, variable persistence (16ms~4s), infinite persistence
Waveform Update Rate 120,000 waveforms per second, maximum
Display Graticule 8 x 10 divisions
Display mode YT ;XY

Interface

USB Port USB 2.0 High-speed host port X1, USB High-speed 2.0 device port X1
Ethernet(LAN) Port RJ-45 connector, 10/100Mbps with HP Auto-MDIX
Go-NoGo BNC 5V Max/10mA TTL open collector output
Kensington Style Lock Rear-panel security slot connects to standard Kensington-style lock.

Logic analyser specifications

Sample Rate Per Channel 1GSa/s
Bandwidth 200MHz
Record Length Per Channel 10M pts (max)
Input Channels 16 Digital (D15 - D0)
Trigger type Edge, Pattern, Pulse Width, Serial bus (I2C, SPI, UART(RS232/422/485), CAN, LIN), Parallel Bus
Thresholds Quad D0~D3, D4~D7,D8~D11 ,D12~D15 Thresholds
Threshold selections TTL, CMOS(5V,3.3V,2.5V), ECL, PECL,0V ,User Defined
User-defined Threshold Range ±5V
Maximum Input Voltage ±40 V
Minimum Voltage Swing ±250 mV
Vertical Resolution 1 bit

AWG Specifications (MSO-2000EA only)

Channels 2
Sample Rate 200 Msa/s
Vertical Resolution 14 bits
Max. Frequency 25 MHz
Standard Waveform Sine, Square, Pulse, Ramp, DC, Noise
Built-in ARB Waveform Sinc, Gaussian, Lorentz, Exponential Rise, Exponential Fall, Haversine, Cardiac
Output Range 20 mVpp to 5 Vpp, HighZ;10 mVpp to 2.5 Vpp, 50 Ω
Output Resolution 1mV
Output Accuracy 2% (1 kHz)
Offset Range ±2.5 V, HighZ;±1.25 V, 50 Ω
Offset Resolution 1mV
Sine
Frequency Range 100mHz to 25MHz
Flatness ±0.5 dB( relative to 1kHz)
Harmonic Distortion -40 dBc
Stray (Non-harmonic) -40 dBc
Total Harmonic Distortion 1%
S/N Ratio 40 dB
Square/Pulse
Frequency Range 100mHz to 15MHz
Rise/Fall time <15ns
Overshoot <3%
Duty cycle Square:50%;Pulse:0.4%~99.6%
Min. Pulse Width 30 ns
Jitter 500 ps
Ramp
Frequency Range 100mHz~1MHz
Linearity 1%
Symmetry 0 to 100%

Miscellaneous

Multi-language menu Available
operation environment Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C.
On-line help Available
Time clock Time and Date ,Provide the Date/Time for saved data
Dimensions 384mmX208mmX127.3mm
Weight 3kg

Do you have a 200MHz, 2-channels, Digital Storage Oscilloscope, 16-channel LA, dual channel 25MHz AFG that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your 200MHz, 2-channels, Digital Storage Oscilloscope, 16-channel LA, dual channel 25MHz AFG calibrated today! Click Here!