Fluke I6000S-FLEX-24 - i6000s Flex AC Current Probe (24 inch)
Overview
Features
Specifications
Calibration
The i6000sflex is an AC current probe utilising the Rogowski principle. It can be used to measure currents up to 6000 A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.
Electrical Characteristics | |
Current ranges | 60 A / 600 A / 6000 A AC rms |
Output sensitivity (AC coupled) | 50 mV /5 mV / 0.5 mV per A |
Load impedance | 100 kOhm minimum |
Accuracy (at +25°C) | ±1% of range (45 – 65 Hz) |
Linearity (10% to 100% of range) | ±0.2% of reading |
Noise | 8 mV AC rms (60 A) |
2 mV AC rms (600/6000 A) | |
Frequency range | 10 Hz to 50 kHz (-3 dB) |
Phase error | < ±1° (45 – 65 Hz) |
±10° (at 20 kHz) | |
Position sensitivity (with cable > 25 mm from the coupling) | ±2% of range |
External field (with cable > 200 mm from the head) | ±1% of range |
Power supply | 2 x AA MN 1500 LR6 alkaline |
400 Hours, low battery indicator or dedicated ext power supply | |
Temperature coefficient | ±0.08% of reading per ° C |
Working voltage (see Safety Standards section) | 600 V AC rms or DC |
General Characteristics | |
Head cable length (double insulated) | 610 mm (24 in) I6000s Flex-24 |
915 mm (36 in) I6000s Flex-36 | |
Head cable diameter | 14.3 mm |
Head bend radius | 38.1 mm |
Cable length (head to electronics) | 2 m |
Output connection | 0.5 m cable terminated with safety BNC connector |
Supplied with 4 mm safety plug adaptor | |
Operating temperature range | -20 to +90°C (head) |
-20 to +85°C (electronics) | |
Storage temperature range | -40 to +105°C (head) |
-20 to +85°C (electronics) | |
Operating humidity | 15% to 85% (non condensing) |
Weight | 180 g (head), 190 g (electronics) |
Safety Standards | |
BS EN 61010 | 1: 2001 |
BS EN 61010 | 2-032: 2002 |
BS EN 61010 | 031: 2002 |
600 V rms, Category III, Pollution degree 2 | |
EMC standards | BS EN 61326: 1998 +A1, A2, and A3 |
Use of the probe on uninsulated conductors is limited to 600 V AC rms or DC and frequencies below 1 kHz |
Do you have a i6000s Flex AC Current Probe (24 inch) that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your i6000s Flex AC Current Probe (24 inch) calibrated today! Click Here!
There are currently no reviews for this product.