GW Instek SFG-2120 - 20MHz DDS Function Generator with Counter, Sweep & AM, FM Modulation.
Based on the Direct Digital Synthesized (DDS) technology and unique FPGA design, the SFG-2000/2100 Series Function Generators are built with exceptionally high performance far exceeding that of any conventional function generators at a very competitive price. Stable output frequency, low distortion, and fine frequency resolution are the most remarkable characteristics of this product series.
The SFG-2000/2100 Series include four members in each family at 4MHz and 10MHz bandwidth(perivd), The SFG-2100 Series have additional functions of Sweep, AM/FM modulation, and External Counter. As a result of the 20ppm stability level and output waveform accuracy, The SFG-2000/2100 Series well fit into a wide variety of applications, such as signal generator for experiment labs, reference signal for PLL (Phase Locked Loop), and calibration and adjustment source for electronic devices.
Ouput Waveform
The SFG-2000/2100 Series provide Sine, Triangle and Square waveforms with DC offset and variable duty cycle at 20ppm frequency stability and accuracy. The low drift rate and -55dBc low sine wave distortion output significantly extend product application range in various market sectors.
The TTL/CMOS output is also available to fulfill various requirements. In addition to the basic functions, The SFG-2100 Series provide advanced functions such as AM/FM modulation, sweep mode, and Built-In Frequency Counter.
DDS FG VS. CONVENTIONAL FG
The SFG-2000/2100 Series generates signals by continuously delivering a series of sampling values from a sine waveform table (stored in RAM) to DAC (Digital to Analog Converter) for waveform construction. With a low pass filter circuit to filter out the harmonics of the DAC output and smooth the signal, the SFG-2000/2100 Series is able to provide a stable output with very low waveform distortion. This is very different from the way a conventional FG generates a signal. Since a conventional FG needs to obtain its signal by switching current sources between positive and negative directions all the time, the "Ringing" distortion occurs at the peak of the signal waveform where the switching is activated. This distortion is especially serious when the output amplitude is low. For the SFG-2000/2100 DDS FG, however, the waveform distortion remains low even when the output amplitude is at only 2mVpp.
- DDS Technology and FPGA Chip Design.
- Frequency Range:1Hz~20MHz.
- High Frequency Accuracy : + 20ppm.
- High Frequency Stability : + 20ppm.
- Frequency Resolution :100mHz.
- Low Distortion Sine Wave:-55dBc,0.1Hz~200kHz.
- Front Panel Setting Save/Recall with 10 Groups of Setting Memories.
- Build-in 6 Digits 150MHz/High Resolution Counter.
- INT/EXT AM/FM Modulation.
- LIN/LOG Sweep Mode.
Main |
||
Frequency Range (Sine, Square) |
SFG-2110 : 0.1Hz ~ 10MHz |
|
Frequency Range (Triangle) | 0.1Hz~1MHz | |
Frequency Resolution | 0.1Hz | |
Frequency Stability | ± 20 ppm | |
Frequency Accuracy | ± 20 ppm | |
Aging | ± 5 ppm /year | |
Output Function | Sine, Square, Triangle | |
Amplitude Range | 2mV~10Vpp(50Ω Load) | |
Impedance | 50Ω±10% | |
Attenuator | -20dB±1dB×2 | |
DC Offset | <-5V~>+5V(50Ω Load) | |
Duty Cycle | 20% to 80%, 2Hz~1MHz (Only Square) | |
Range Resolution | 1% | |
Display | 9 位 LED display | |
SINE WAVE |
||
Harmonics Distortion | -55dBc,0.1Hz~200kHz; -40dBc,0.2MHz~4MHz; -30dBc,4MHz~10MHz (Specification applied to both TTL/CMOS OFF and from MAX. to 1/10 level) |
|
Flatness(Relative to 1kHz) | <± 0.3dB,0.1Hz~1MHz; <± 0.5dB,1MHz~4MHz; <± 2dB, 4MHz~10MHz | |
TRIANGLE WAVE |
||
Linearity | ≧98%,0.1Hz~100kHz;≧95%,100kHz~1MHz | |
SQUARE WAVE |
||
Symmetry | ± 1% of period +4ns to 0.1Hz~100kHz | |
Rise or Fall Time | ≦25ns at maximum output.(into 50 load) | |
CMOS Output |
||
Level | 4Vpp±1Vpp~15Vpp±1Vpp adjustable; Rise or Fall Time ≦120ns | |
TTL Output |
||
Level | ≧3Vpp ; Fan out; 20 TTL Load ;Rise and Fall Time ≦25ns | |
SWEEP OPERATION |
||
Rate |
100:1 ratio max. and adjustable (In order to get the maximum sweep span, the sweep time needs to be tuned on when adjusting the sweep span.)1Sec~30Sec adjustable (When the sweep time is too long, the stop frequency will reach and stay at the maximum frequency of the instrument until the end of the sweep cycle.)Lin./Log. switch selector |
|
Time | ||
Mode | ||
AMPLITUDE MODULATION |
||
Depth & Modulation Frequency | 0~100% ; 400Hz(INT), DC~1MHz(EXT) | |
Carrier BW | 100Hz~5MHz(-3dB) | |
EXT Modulation Sensitivity | ≦ 10Vpp 100% modulation | |
FREQUENCY MODULATION |
||
Deviation & Modulation Frequency | 0~±50kHz,center at 1MHz, 400Hz fixed(INT), 1kHz fixed(EXT) | |
EXT Modulation Sensitivity | ≦ 10Vpp 在 10% modulation (center at 1MHz) | |
FREQUENCY COUNTER |
||
Range | 5Hz~150MHz | |
Accuracy | Time base accuracy±1位 | |
Time base | ±20ppm(23℃±5℃) after 30 minutes warm up後 | |
Resolution | 100nHz@1Hz, 0.1Hz@100MHz | |
Input Impedance | 1MΩ/150pf | |
Sensitivity | ≦ 35mVrms (5Hz~100MHz) ≦ 45mVrms (100MHz~150MHz) |
|
STORE/RECALL FUNCTION | ||
10 groups of panel settings | ||
POWER SOURCE | ||
AC115V±10%, AC 230V+10%/-15%, 50/60Hz | ||
Accessories |
||
User Manual×1 Power Cord x 1 GTL-101 x 1(SFG-2000 Series) GTL-101× 2 (SFG-2110) |
||
DIMENSION & WEIGHT | 266(W)×107(H)×293(D) mm, Approx. 3.2kg |
Do you have a 20MHz DDS Function Generator with Counter, Sweep & AM, FM Modulation. that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your 20MHz DDS Function Generator with Counter, Sweep & AM, FM Modulation. calibrated today! Click Here!
There are currently no reviews for this product.