Graphtec America GS-4VT - 4ch Voltage / Temperature Terminal
Overview
Features
Specifications
Calibration
Connects the GL100 for up to 4ch of voltage DC (20mV to 50V as well as 1-5V) and thermocouple (K or T type) temperature measurement. Each voltage / temperature channel is configurable. Combination of pulse and logic channels can be measured at the same time.
Measurement Data | Voltage / Tempaerature, Logic / Pulse (instant, accumulated) | |
Measurement channels | Voltage / Temperature 4ch Logic / Pulse 4ch |
|
Voltage Measurement Range | 20 | 50 | 100 | 200 | 500mV 1 | 2 | 5 | 10 | 20 | 50V 1-5FV F.S. |
|
Voltage Measurement Degree of Accuracy | 0.15% of F.S. | |
Input Impedence / Input Method |
1Ω±5% / Scan by means of photo-memory, full channel input disconnection
|
|
Temperature Coefficient |
Amplification: 0.01% of F.S./ºC Zero: 0.02% of F.S./ºC
|
|
Permitable Signal Resistance |
300Ω and below
|
|
Maximum Input Voltage | Input Terminal + / – Interval: 60Vp-p Input Terminal / Input terminal interval: 60Vp-p Input Terminal / GND Interval: 60Vp-p |
|
Voltage-Proofing | Input Terminal / Input terminal interval: 350Vp-p 1 Minute Input Terminal / GND interval: 350Vp-p 1 Minute |
|
Insulation Resistance | Input Terminal / GND interval: 50MΩ and greater (at DC500V) | |
Common Mode Removal Ratio | 90dB and greater (50/60Hz source signal 300Ω and lower) | |
Noise | 48dB and greater (+ / – at short) | |
Range of Temperature Measurement | K: -200.0ºC~1370.0ºC T: -200.0ºC~400.0ºC |
|
Temperature Measurment Degree of Accuracy (Standard Compensation of±0.5ºC) | K-type Thermocouple |
-200≤TS≤-100 ± (0.05% of rdg +2.0ºC) -100≤TS≤1370ºC ± (0.05% of rdg +1.0ºC) |
T-type Thermocouple |
-200≤TS≤-100 ± (0.1% of rdg +1.5ºC)
-100≤TS≤400ºC ± (0.1% of rdg +0.5ºC) |
|
Burnout Detection | Yes | |
Logic / Pulse Input | Range of Input Voltage | 0 to +24V (Single line ground input) |
Input Signal | Wireless pressure point (a contact point, b contact point, NO, NC), open corrector, voltage input | |
Input Voltage Threshold | Approx. 2.5V | |
Hysterisis | Approx. 0.5V (+2v to +2.5V) | |
Range of Pulse Measurement | Instant: Maximum 200C / sampling Accumulated value: Maximum 65535C (clear accumulated value by QUIT key or when starting recording) |
|
Room Temperature Compensation | ON / OFF | |
Temperature Unit of Denomination | ºC/ºF | |
Sampling Intervals |
0.5 | 1 | 2 | 5 | 10 | 20 | 30 sec |
|
Extension Cable | Approx. 20cm | |
Operating Environment | -10º to 50ºC, 80% RH and below (dew-less) | |
External Dimensions | 46mm x 66mm x 35.5mm (excludes protrusion) | |
Weight | 85g (2.99 oz) |
Do you have a 4ch Voltage / Temperature Terminal that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your 4ch Voltage / Temperature Terminal calibrated today! Click Here!
There are currently no reviews for this product.