Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

GW Instek PSW-1080L555 - Triple-Channel Programmable Switching 3 x 160V/7.2A 1080W Multi-Range D.C. Power Supply

Triple-Channel Programmable Switching 3 x 160V/7.2A 1080W Multi-Range D.C. Power Supply

GW Instek

Rated 0 / 5 (0 reviews)

Category : DC Power Supplies

by quote only add to cart

Documents:
Datasheet Brochure

Overview
Features
Specifications
Calibration

Second to none, dominating mid/low power ranges

 

PSW-Multi series is a dual-channel or triple-channel wide range output programmable switching DC power supply. The maximum output power can reach, 1080W. There are 13 dual-channel models with a rated power of 720W, and 24 triple-channel models with a rated power of 1080W. The rated voltages of low voltage modules are 30V, 40V, 80V, 160V. The rated voltages of high voltage modules are 250V and 800V. 

The special functions are as follows

 

  • The advanced web server, a unique function of the PSW-Multi series,
    can directly execute SCPI commands on the server and control the PSW-Multi power supply.
    The data log has an interval of 1 second. It can edit output sequence.
     
  • Wide-range output: Provides a wide range of voltage/current outputs under the same rated power.
    One power supply has the total capability of multiple power supplies.
     
  • Bleed Circuit: Accelerates the voltage fall time.
     
  • Sequence: Saves the output sequence in a USB flash drive to directly control the power supply to execute the automatic test sequence.
     
  • The CC/CV priority mode of PSW-Multi is a very useful feature for protecting the DUT.
     
  • Conventional power supplies usually operate in CV mode when outputting. During power output, capacitive loads or current-intensive loads can cause inrush currents. Taking the I-V verification curve of an LED as an example, it would be challenging to measure it using a conventional power supply. In the initial state, a conventional power supply operates in CV mode. When the output voltage exceeds the forward voltage of the LED,
    the current will instantaneously flow, surpassing the default current limit value. Even when the current becomes stable after switching to CC mode, the crossover point between CV and CC can still potentially damage the DUT. However, the PSW-Multi series is capable of operating in CC mode during power output to suppress inrush currents and prevent damage to the DUT when the voltage instantaneously conducts.
     
  • Adjustable slew rate allows users to set the rise and fall times of voltage or current.
    By controlling the slew rate settings, it becomes convenient to verify the DUT under varying voltage or current conditions. In manufacturing tests for lighting devices or large capacitors, power output often generates significant inrush currents, which can greatly reduce the lifespan of the DUT. To prevent damage caused by inrush currents, a slow voltage output significantly reduces the harm caused by inrush currents, thereby achieving device protection.
     
  • The OVP and OCP functions provided by the PSW-Multi series can be self-defined and the default value is 110% of the rated value. When the protection setting is triggered, the output will be turned off to protect the DUT.
    USB and LAN are standard communications interfaces of PSW-Multi series, while GPIB-USB and RS232-USB are optional accessories. All interfaces support LabView driver and Data Logging PC software.
  • Multi-channel: maximum 720W for dual-channel models and maximum 1080W for triple-channel models; output latency between channels with the same voltage module is less than 0.1ms
  • Multiple voltage combinations: low voltage combinations can be selected from 30V/40V/80V/160V; high voltage combinations can be selected from 250V/800V
  • Advanced web server: executes SCPI commands; controls through the server; data log; edit sequence
  • CC/CV priority mode selection is ideal for battery and LED industries
  • Adjustable slew rate
  • High efficiency and high power density power supply
  • Standard communications interfaces: LAN, USB, external analog remote control terminal
  • Optional communications interfaces: GPIB-USB adapter, RS232-USB cable
  • Support LabVIEW Driver

 

Channel 1

Module Type
H/L Voltage ClassicficationL
Rated output voltage160 V
Rated output current7.2 A
Rated output power360 W
Power ratio3.2
Constant Voltage Mode
Line regulation (*1)83 mV
Load regulation (*2)85 mV
Ripple and noise (*3)
p-p (*4)60 mV
r.m.s. (*5)12 mV
Temperature coefficient100ppm/°C of rated output voltage, after a 30 minute warm-up
Remote snese compensation voltage (single wire)0.6 V
Rise time (*6)
Rated load100 ms
No load100 ms
Fall time (*7)
Rated load100 ms
No load1000 ms
Transient response time (*8)2 ms
Constant Current Mode
Line regulation (*1)12.2 mA
Load regulation (*9)12.2 mA
Ripple and noise (r.m.s)15 mA
Temperature coefficient200ppm/°C of rated output current, after a 30 minute warm-up
Protection Function
Over voltage protection (OVP)
Setting range16-176 V
Setting accuracy± (2% of rated output voltage)
Over current protection (OCP)
Setting range0.72-7.92 A
Setting accuracy± (2% of rated output current)
Over temperature protection (OTP)
OperationTurn the output off
Low AC input protection (AC-FAIL)
OperationTurn the output off
Power limit (POWER LIMIT)
OperationOver power limit.
Value (fixed)Approx. 105% of rated output power
Analog Programming and Monitoring
External voltage control output voltage (at 23 °C ± 5 °C)Accuracy and linearity: ±0.5% of rated output voltage.
External voltage control output current (at 23 °C ± 5 °C)Accuracy and linearity: ±1% of rated output current
External resistor control output voltage (at 23 °C ± 5 °C)Accuracy and linearity: ±1.5% of rated output voltage.
External resistor control output current (at 23 °C ± 5 °C)Accuracy and linearity: ±1.5% of rated output current
Output voltage monitor (at 23 °C ± 5 °C)Accuracy: ±1%
Output current monitor (at 23 °C ± 5 °C)Accuracy: ±1%
Shutdown controlTurns the output off with a LOW (0V to 0.5V) or short-circuit
Output on/off controlPossible logic selections: Turn the output on using a LOW (0V to 0.5V) or short-circuit, turn the output off using a HIGH (4.5V to 5V) or open-circuit. Turn the output on using a HIGH (4.5V to 5V) or open-circuit, turn the output off using a LOW (0V to 0.5V) or short-circuit.
CV/CC/ALM/PWR ON/OUT ON indicatorPhotocoupler open collector output; Maximum voltage 30V, maximum sink current 8mA.
Front Panel
Display, 4 digits
Voltage accuracy (at 23 °C ± 5 °C; ± (0.1% +))100 mV
Current accuracy (at 23 °C ± 5 °C; ± (0.1% +))5 mA
IndicationsGREEN LED's: CV, CC, VSR, ISR, DLY, RMT, 20, 40, 60, 80, 100, %W, W, V, A
RED LED's: ALM
ButtonsFunction, OVP/OCP, Set, Test, Lock/Local, PWR DSPL, Output
KnobsVoltage, Current
USB portType A USB connector
Programming and Measurement (USB, LAN, GPIB)
Output voltage programming accuracy (at 23 °C ± 5 °C; ± (0.1% +))100 mV
Output current programming accuracy (at 23 °C ± 5 °C; ± (0.1% +))5 mA
Output voltage programming resolution3 mV
Output current programming resolution1 mA
Output voltage measurement accuracy (at 23 °C ± 5 °C; ± (0.1% +))100 mV
Output current measurement accuracy (at 23 °C ± 5 °C; ± (0.1% +))5 mA
Output voltage measurement resolution3 mV
Output current measurement resolution1 mA
Input Characteristics
Efficiency
100Vac79%
200Vac81%
Norminal input rating100Vac to 240Vac, 50Hz to 60Hz, single phase
Input voltage range85Vac ~ 265Vac
Input frequency range47Hz ~ 63Hz
Maximum input current
100Vac15 A
200Vac7.5 A
Inrush currentLess than 75A
Maximum input power1500 VA
Power factor
100Vac0.99
200Vac0.97
Hold-up time20ms or greater
Interface Capabilities
USBTypeA: Host, TypeB: Slave, Speed: 1.1/2.0, USB Class: CDC(Communications Device Class)
LANMAC Address, DNS IP Address, User Password, Gateway IP Address, Instrument IP Address, Subnet Mask
GPIBOptional: GUG-001 (GPIB to USB Adapter)

 

Channel 2

Module Type
H/L Voltage ClassicficationL
Rated output voltage160 V
Rated output current7.2 A
Rated output power360 W
Power ratio3.2
Constant Voltage Mode
Line regulation (*1)83 mV
Load regulation (*2)85 mV
Ripple and noise (*3)
p-p (*4)60 mV
r.m.s. (*5)12 mV
Temperature coefficient100ppm/°C of rated output voltage, after a 30 minute warm-up
Remote sense compensation voltage (single wire)0.6 V
Rise time (*6)
Rated load100 ms
No load100 ms
Fall time (*7)
Rated load100 ms
No load1000 ms
Transient response time (*8)2 ms
Constant Current Mode
Line regulation (*1)12.2 mA
Load regulation (*9)12.2 mA
Ripple and noise (r.m.s.)15 mA
Temperature coefficient200ppm/°C of rated output current, after a 30 minute warm-up
Protection Function
Over voltage protection (OVP)
Setting range16-176 V
Setting accuracy± (2% of rated output voltage)
Over current protection (OCP)
Setting range0.72-7.92 A
Setting accuracy± (2% of rated output current)
Over temperature protection (OTP)
OperationTurn the output off
Low AC input protection (AC-FAIL)
OperationTurn the output off
Power limit (POWER LIMIT)
OperationOver power limit.
Value (fixed)Approx. 105% of rated output power
Analog Programming and Monitoring
External voltage control output voltage (at 23 °C ± 5 °C)Accuracy and linearity: ±0.5% of rated output voltage.
External voltage control output current (at 23 °C ± 5 °C)Accuracy and linearity: ±1% of rated output current.
External resistor control output voltage (at 23 °C ± 5 °C)Accuracy and linearity: ±1.5% of rated output voltage.
External resistor control output current (at 23 °C ± 5 °C)Accuracy and linearity: ±1.5% of rated output current.
Output voltage monitor (at 23 °C ± 5 °C)Accuracy: ±1%
Output current monitor (at 23 °C ± 5 °C)Accuracy: ±1%
Shutdown controlTurns the output off with a LOW (0V to 0.5V) or short-circuit
Output on/off controlPossible logic selections: Turn the output on using a LOW (0V to 0.5V) or short-circuit, turn the output off using a HIGH (4.5V to 5V) or open-circuit. Turn the output on using a HIGH (4.5V to 5V) or open-circuit, turn the output off using a LOW (0V to 0.5V) or short-circuit.
CV/CC/ALM/PWR ON/OUT ON indicatorPhotocoupler open collector output; Maximum voltage 30V, maximum sink current 8mA.
Front Panel
Display, 4 digits
Voltage accuracy (at 23 °C ± 5 °C; ± (0.1% +))100 mV
Current accuracy (at 23 °C ± 5 °C; ± (0.1% +))5 mA
IndicationsGREEN LED's: CV, CC, VSR, ISR, DLY, RMT, 20, 40, 60, 80, 100, %W, W, V, A
RED LED's: ALM
ButtonsFunction, OVP/OCP, Set, Test, Lock/Local, PWR DSPL, Output
KnobsVoltage, Current
USB portType A USB connector
Programming and Measurement (USB, LAN, GPIB)
Output voltage programming accuracy (at 23 °C ± 5 °C; ± (0.1% +))100 mV
Output current programming accuracy (at 23 °C ± 5 °C; ± (0.1% +))5 mA
Output voltage programming resolution3 mV
Output current programming resolution1 mA
Output voltage measurement accuracy (at 23 °C ± 5 °C; ± (0.1% +))100 mV
Output current measurement accuracy (at 23 °C ± 5 °C; ± (0.1% +))5 mA
Output voltage measurement resolution3 mV
Output current measurement resolution1 mA
Input Characteristics
Efficiency
100V ac79%
200V ac81%
Norminal input rating100Vac to 240Vac, 50Hz to 60Hz, single phase
Input voltage range85Vac ~ 265Vac
Input frequency range47Hz ~ 63Hz
Maximum input current
100Vac15 A
200Vac7.5 A
Inrush currentLess than 75A
Maximum input power1500VA
Power factor
100Vac0.99
200Vac0.97
Hold-up time20ms or greater
Interface Capabilities
USBTypeA: Host, TypeB: Slave, Speed: 1.1/2.0, USB Class: CDC(Communications Device Class)
LANMAC Address, DNS IP Address, User Password, Gateway IP Address, Instrument IP Address, Subnet Mask
GPIBOptional: GUG-001 (GPIB to USB Adapter)

 

Channel 3

Module Type
H/L Voltage ClassicficationL
Rated output voltage160 V
Rated output current7.2 A
Rated output power360 W
Power ratio3.2
Constant Voltage Mode
Line regulation (*1)83 mV
Load regulation (*2)85 mV
Temperature coefficient100ppm/°C of rated output voltage, after a 30 minute warm-up
Remote sense compensation voltage (single wire)0.6 V
Transient response time (*8)2 ms
Ripple and noise (*3)
p-p (*4) 60 mV
r.m.s. (*5)12 mV
Rise time (*6)
Rated load100 ms
No load100 ms
Fall time (*7)
Rated load100 ms
No load1000 ms
Constant Current Mode
Line regulation (*1)12.2 mA
Load regulation (*9)12.2 mA
Ripple and noise (r.m.s.)15 mA
Temperature coefficient200ppm/°C of rated output current, after a 30 minute warm-up
Protection Function
Over voltage protection (OVP)
Setting range16-176 V
Setting accuracy± (2% of rated output voltage)
Over current protection (OCP)
Setting range072-7.92 A
Setting accuracy± (2% of rated output current)
Over temperature protection (OTP)
OperationTurn the output off
Low AC input protection (AC-FAIL)
OperationTurn the output off
Power limit (POWER LIMIT)
OperationOver power limit.
Value (fixed)Approx. 105% of rated output power
Analog Programming and Monitoring
External voltage control output voltage (at 23 °C ± 5 °C)Accuracy and linearity: ±0.5% of rated output voltage.
External voltage control output current (at 23 °C ± 5 °C)Accuracy and linearity: ±1% of rated output current.
External resistor control output voltage (at 23 °C ± 5 °C)Accuracy and linearity: ±1.5% of rated output voltage.
External resistor control output current (at 23 °C ± 5 °C)Accuracy and linearity: ±1.5% of rated output current.
Output voltage monitor (at 23 °C ± 5 °C)Accuracy: ±1%
Output current monitor (at 23 °C ± 5 °C)Accuracy: ±1%
Shutdown control Turns the output off with a LOW (0V to 0.5V) or short-circuit
Output on/off controlPossible logic selections: Turn the output on using a LOW (0V to 0.5V) or short-circuit, turn the output off using a HIGH (4.5V to 5V) or open-circuit. Turn the output on using a HIGH (4.5V to 5V) or open-circuit, turn the output off using a LOW (0V to 0.5V) or short-circuit.
CV/CC/ALM/PWR ON/OUT ON indicatorPhotocoupler open collector output; Maximum voltage 30V, maximum sink current 8mA.
Front Panel
Display, 4 digits
Voltage accuracy (at 23 °C ± 5 °C; ± (0.1% +))100 mV
Current accuracy (at 23 °C ± 5 °C; ± (0.1% +))5 mA
IndicationsGREEN LED's: CV, CC, VSR, ISR, DLY, RMT, 20, 40, 60, 80, 100, %W, W, V, A RED LED's: ALM
ButtonsFunction, OVP/OCP, Set, Test, Lock/Local, PWR DSPL, Output
KnobsVoltage, Current
USB port Type A USB connector
Programming and Measurement (USB, LAN, GPIB)
Output voltage programming accuracy (at 23 °C ± 5 °C; ± (0.1% +))100 mV
Output current programming accuracy (at 23 °C ± 5 °C; ± (0.1% +))5 mA
Output voltage programming resolution3 mV
Output current programming resolution1 mA
Output voltage measurement accuracy (at 23 °C ± 5 °C; ± (0.1% +))100 mV
Output current measurement accuracy (at 23 °C ± 5 °C; ± (0.1% +))5 mA
Output voltage measurement resolution3 mV
Output current measurement resolution1 mA
Input Characteristics
Efficiency
100 Vac79%
200 Vac81%
Nominal input rating100Vac to 240Vac, 50Hz to 60Hz, single phase
Input voltage range85Vac ~ 265Vac
Input frequency range47Hz ~ 63Hz
Maximum Input Current
100 Vac15 A
200 Vac7.5 A
Inrush currentLess than 75 A
Power factor
100 Vac0.99
200 Vac0.97
Maximum input power1500 VA
Interface Capabilities
USBTypeA: Host, TypeB: Slave, Speed: 1.1/2.0, USB Class: CDC(Communications Device Class)
LANMAC Address, DNS IP Address, User Password, Gateway IP Address, Instrument IP Address, Subnet Mask
GPIBOptional: GUG-001 (GPIB to USB Adapter)

 

Environmental Conditions

Operaing temperature0°C to 50 °C
Storage temperature-25°C to 70 °C
Operating humidity20% to 85% RH; No condensation
Storage humidity90% RH or less; No condensation
AltitudeMaximum 2000m

 

General Specifications

Weight (main unit only)Approx. 5.4kg
Dimensions (W×H×D)142 x 124 x 350 mm
CoolingComplies with the European EMC directive for Class A test and measurement products
SafetyComplies with the European Low Voltage Directive and carries the CE-marking
Withstand voltage
Between input and chassisNo abnormalities at 1500 Vac for 1 minute
Between input and outputNo abnormalities at 3000 Vac for 1 minute
Between output and chassisNo abnormalities at 500 Vdc for 1 minute for 30V, 40V, 80V, 160V models
No abnormalities at 1500 Vdc for 1 minute for 250V, 800V models
Insulation resistance
Between input and chassis500 Vdc, 100 MΩ or more
Between input and output500 Vdc, 100 MΩ or more
Between output and chassis500 Vdc, 100 MΩ or more for 30V, 40V, 80V, 160V and 250V models 1000 Vdc, 100 MΩ or more for 800V models

*1: At 85 ~ 132Vac or 170 ~ 265Vac, constant load.
*2: From No-load to Full-load, constant input voltage. Measured at the sensing point in Remote Sense.
*3: Measure with JEITA RC-9131B (1:1) probe
*4: Measurement frequency bandwidth is 10Hz to 20MHz.
*5: Measurement frequency bandwidth is 5Hz to 1MHz
*6: From 10% to 90% of rated output voltage, with rated resistive load
*7: From 90% to 10% of rated output voltage, with rated resistive load.
*8: Time for output voltage to recover within 0.1% + 10mV of its rated output for a load change from 50 to 100% of its rated output current
*9: For load voltage change, equal to the unit voltage rating, constant input voltage.


Do you have a Triple-Channel Programmable Switching 3 x 160V/7.2A 1080W Multi-Range D.C. Power Supply that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your Triple-Channel Programmable Switching 3 x 160V/7.2A 1080W Multi-Range D.C. Power Supply calibrated today! Click Here!

 

There are currently no reviews for this product.

 

Review the GW Instek PSW-1080L555 - Triple-Channel Programmable Switching 3 x 160V/7.2A 1080W Multi-Range D.C. Power Supply

Triple-Channel Programmable Switching 3 x 160V/7.2A 1080W Multi-Range D.C. Power Supply

Name :

Email :

Title :

Review: