GW Instek GFG-8210 - 10MHz Function Generator
Overview
Features
Specifications
Calibration
GFG-8210:Frequency Range: 0.1Hz~10MHz - Waveforms: Sine, Triangle, Square, Ramp, TTL and CMOS Output - External Voltage Controlled Frequency (VCF) Function - Duty Cycle Control with Signal Inversion Capability - Variable DC Offset Control - Two-Step (-20Bx2) and Variable Attenuator - Built-in 6 Digit Counter with INT/EXT Function Up to 150MHz/High Resolution - LIN/LOG Sweep Mode - Sweep Output
- Frequency Range：0.1Hz ~ 10MHz
- Waveforms：Sine, Triangle, Square, Ramp, TTL and CMOS Output
- External Voltage Controlled Frequency (VCF) Function
- Duty Cycle Control with Signal Inversion Capability
- Variable DC Offset Control
- Two-Step (-20dBx2) and Variable attenuator
- Built-in 6 Digit Counter with INT/EXT Function up to 150MHz / high resolution
- LIN/LOG Sweep Mode
- Sweep Output
| Main | |
| Frequency Range | 0.1Hz ~ 10MHz (8 ranges) |
| Amplitude | >10Vp-p (into 50Ω load) |
| Impedance | 50Ω+10% |
| Attenuator | -20dB+1dB x 2 |
| DC Offset | <-5V ~ >5V( into 50Ω load) |
| Duty Control | 15% : 85% : 15% to 1MHz Continue variable (square wave only) |
| Display | 6 digits LED display |
| Sine Wave | |
| Distortion | 1% typical |
| Flatness | + 0.45dB (+5%) |
| Triangle Wave | |
| Linear | >98% to 100kHz |
| Square Wave | |
| Symmetry | +2%, 1Hz ~ 100kHz |
| Rise or Fall Time | < 35nS |
| CMOS Output | |
| Max. Frequency | 2MHz |
| Level | <4Vpp ~ 14.5Vpp+0.5Vpp adjustable |
| Rise or Fall Time | <120nS |
| TTL Output | |
| Level | >3Vpp |
| Rise or Fall Time | <20nS |
| VCF | |
| Input Voltage | 0V~10V ± 1V(100 : 1) |
| Input Impedance | 10kΩ ±10% |
| Sweep Operation | |
| Sweep/Manual | Switch selector |
| Sweep/Rate | >100 : 1 ratio max. and adjustable |
| Sweep/Time | 0.5sec. ~ 30sec. adjustable |
| Sweep/Mode | Lin./Log. switch selector |
| Sweep/Out | 0V ~ 10+1V |
| Frequency Counter | |
| INT./EXT. | Switch selector |
| Range | 0.1Hz ~ 10MHz (5Hz ~ 150MHz EXT.) |
| Accuracy | Timebase accuracy ±1 count |
| Timebase | ±20ppm (23°C±5°C) after 30 minutes warm up |
| Resolution | The maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz |
| Input Impedance | 1MΩ//150pF |
| Power Source | AC 115V/230V±15%, 50/60Hz |
| Accessories | Power cord × 1, Instruction manual × 1, GTL-101 × 2 |
| Dimensions & Weight | 251(W) × 91(H) × 291(D) mm, Approx. 2.2 kg |
Do you have a 10MHz Function Generator that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your 10MHz Function Generator calibrated today! Click Here!
There are currently no reviews for this product.
