GW Instek GFG-8250A - 5MHz Function Generator
Overview
Features
Specifications
Calibration
Frequency Range : 0.5Hz ~ 5MHz
Waveforms : Sine, Triangle, Square, Ramp, TTL and CMOS Output
External Voltage Controlled Frequency (VCF) Function
Duty Cycle Controlled with Signal Inversion Capability
Variable DC Offset Control
Two-Step (-20dB x 2) and Variable Attenuator
Built-in 6 Digit Counter with INT./EXT. Function up to 150MHz / high resolution
Frequency Range : 0.5Hz ~ 5MHz
Waveforms : Sine, Triangle, Square, Ramp, TTL and CMOS Output
External Voltage Controlled Frequency (VCF) Function
Duty Cycle Controlled with Signal Inversion Capability
Variable DC Offset Control
Two-Step (-20dB x 2) and Variable Attenuator
Built-in 6 Digit Counter with INT./EXT. Function up to 150MHz / high resolution
| Frequency Range | 0.5Hz to 5 MHz (7 ranges) |
| Amplitude | >10Vp-p (into 50Ω load) |
| Impedance | 50Ω +10% |
| Attenuator | -20dB+1dB x 2 |
| DC Offset | <-5V ~ >5V (into 50Ω load) |
| Duty Control | 80% : 20% : 80% to 1MHz Continue variable |
| Display | 6 digit LED display |
Sine Wave
| Distortion | <1%, 0.5Hz ~ 100kHz |
| Flatness | <0.3dB, below 500kHz； <1dB, below 5MHz |
Triangle Wave
| Linear | >98%, 0.5Hz ~ 100kHz； >95%, 100kHz ~ 5MHz |
Square Wave
| Symmetry | +2%, 1Hz ~ 100kHz |
| Rise or Fall Time | < 50nS at maximum output (into 50Ω load) |
CMOS Output
| Level | 4Vpp+1Vpp ~ 14.5Vpp+0.5Vpp adjustable |
| Rise or Fall Time | <120nS |
TTL Output
| Level | >3Vpp |
| Fan Out | 20 TTL load |
| Rise/Fall Time | <25nS |
VCF
| Input Voltage | 0V~10V ±1V(100 : 1) |
| Input Impedance | 10kΩ ±10% |
GCV
| Output Voltage | To set the voltage between 0V ~ 2V as per different frequency |
Sweep Operation
| Sweep/Manual | Switch selector |
| Sweep/Rate | 100 : 1 ratio max. and adjustable |
| Sweep/Time | 0.5sec. ~ 30sec. adjustable |
| Sweep/Mode | Lin./Log. switch selector |
Amplitude Modulation
| Depth | 0 ~ 100% |
| MOD. Frequency | 400Hz (INT), DC ~ 1MHz(EXT) |
| Carrier BW | 100Hz ~ 5MHz (-3dB) |
| EXT Sensitivity | <10Vpp for 100% modulation |
Frequency Modulation
| Deviation | 0 ~ + 5% |
| MOD. Frequency | 400Hz(INT), DC ~ 20kHz(EXT.) |
| EXT. Sensitivity | <10Vpp for 10% modulation |
Frequency Counter
| INT./EXT. | Switch selector |
| Range | 0.5Hz ~ 5MHz (5Hz ~ 150MHz EXT.) |
| Accuracy | Timebase accuracy ±1 Count |
| Timebase | ±20ppm (23°C±5°C) after 30 minutes warm up |
| Resolution | The maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz |
| Input Impedance | 1MΩ//150pF |
| Sensitivity | <35mVrms (5Hz ~ 100MHz)；< 45mVrms (100MHz ~ 150MHz) |
General
| Power Source | AC 115V/230V±15%, 50/60Hz |
| Accessories | Power cord × 1, Instruction manual × 1, GTL-101 × 2 |
| Dimensions & Weight | 251(W) × 91(H) × 291(D) mm, Approx. 2.4kg |
Do you have a 5MHz Function Generator that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your 5MHz Function Generator calibrated today! Click Here!
There are currently no reviews for this product.
Recommended Accessories for the 5MHz Function Generator
Alligator Heads
