Test Products International 296 - clamp-on plus DMM with True RMS and Harmonics capabilities
Overview
Features
Specifications
Calibration
TPI offers a full line of digital clamp-on meters for electrical, commercial, HVAC/R, industrial and process control applications.
- True RMS 700 Amps AC/DC
- Trim mode for stable readings
- HDR mode to determine if signal is clean or dirty
- Measure AC/DC volts, resistance, continuity and frequency
- Data hold
- Min/Max/Peak hold
- Sleep mode
- CAT III 600 V rated
- cULus 61010
- 3-year limited warranty
BASIC
- True RMS: Provides accurate and dependable readings of non-linear loads.
- HDR Mode: Determines if a signal is clean or distorted.
- Bar Graph: When measuring frequency, bar graph indicates current level.
- TRIM Mode: Smooths out unstable readings.
- Peak Mode: For start-up and inrush currents.
- Sleep Mode: Preserves battery life.
- Data Hold: Holds the reading on the display for easy viewing.
HVAC/R
- ACA • Heat anticipator current in thermostats.
- ACV • Line voltage.
- ACV or DCV • Control circuit voltage.
- OHMS • Heating element resistance (continuity).
- OHMS • Compressor winding resistance.
- OHMS • Contactor and relay coil resistance.
- ACA • Motor and compressor start up current.
- OHMS • Continuity of wiring.
- Hz/FREQ • Frequency on control and line voltages.
- REC • Record min/max voltage of controls and line voltages.
- ALL • Bar graph to indicate rapid fluctuations.
ELECTRICAL
- ACV • Measure line voltage.
- ACA • Measure line current.
- OHMS • Continuity of circuit breakers.
- DCV • Voltage of direct drive DC motors.
- DCA • Current of direct drive DC motors.
- ACA • Start up current of motors, relays, contactors and transformers.
- ALL • Harmonics detection on line voltages.
ELECTRONIC
- ACV • Measure power supply voltage.
- ACA • Measure power supply current.
- OHMS • Continuity of circuit breakers and fuses.
| DC Voltage | Max Range:600V Max Resolution:0.01V Basic Accuracy: 0.75% |
| AC Voltage | Max Range:600V Max Resolution:0.01V Basic Accuracy: 1% |
| DC Amps | Max Range:700A Max Resolution:0.01A Basic Accuracy: 2% |
| DC Microamps | N/A |
| AC Amps |
Max Range:700A |
| Resistance | Max Range:40KΩ Max Resolution:0.1Ω Basic Accuracy: 1% |
| Frequency | Max Range:10KHz Max Resolution:0.1Hz Basic Accuracy: 0.2% |
| Capacitance | N/A |
| Temperature | N/A |
| Non-Contact Voltage (NCV) | N/A |
| Continuity Buzzer | <100Ω |
| Diode Test | Yes |
| True RMS Response | Yes |
| Peak Hold | Yes |
| Relative Mode | No |
| Min/Max Record | No |
| Data Hold | Yes |
| % Total Harmonic Distortion | Yes |
| Range Selection | Auto / Manual |
| Display Type | 4000 count LCD with analog bargraph |
| Operating Temperature | 14°F to 113°F |
| Relative Humidity | 80% non-condensing |
| Storage Temperature | -4°F to 131°F |
| Battery Type | 9V (MN1604) |
| Battery Life | 80hrs typical |
| Auto Off / Sleep Mode | Yes |
| Dimensions (H x L x W) | 1.5” x 7.25” x 2.5” |
| Weight | 11.1oz |
| Agency Approval | CE IEC 1010: CAT III, 600V cULus 3111-1 |
Do you have a clamp-on plus DMM with True RMS and Harmonics capabilities that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your clamp-on plus DMM with True RMS and Harmonics capabilities calibrated today! Click Here!
There are currently no reviews for this product.
