Fluke I30 - AC/DC Current Clamp
Overview
Features
Specifications
Calibration
The i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement.
| Electrical Specifications | |
| Specified current range | 30 mA to 30A dc, 30 mA to 20 A ac rms |
| Usable current range | 5 mA to 30 A dc, 30 mA to 20 A ac rms |
| Crest Factor | 1.4" |
| Output sensitivity | 100 mV/A |
| Accuracy (at +25 °C) | ± 1 % of reading ± 2 mA |
| Resolution | ± 1 mA |
| Load impedance | > 10 k Ohms and ≤ 100pF |
| Conductor position sensitivity | ± 1 % relative to center reading |
| Frequency range | DC to 20 kHz (- 0.5 dB) |
| Temperature coefficient | ± 0.01 % of reading/°C |
| Power supply | 9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator |
| Working voltage (see Safety Standards section) | 300 V ac rms or dc |
| General Specifications | |
| Maximum conductor size | 19 mm diameter |
| Output connection | 4 mm safety connector |
| Output zero | Manual adjust via thumbwheel |
| Cable length | 1.5 meters |
| Operating temperature range | 0 °C to +50 °C |
| Storage temperature range (with battery removed) | -20 °C to +85 °C |
| Operating humidity | 15 % to 85 % (non-condensing) |
| Weight | 250 g |
| Safety standards | BS EN 61010-1:2001 |
| BS EN 61010-2-032:2002 | |
| BS EN 61010-031:2002 | |
| 300 Vrms, Category III, Pollution Degree 2 | |
| Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz | |
| EMC Standards | EN 61326: 1998 +A1, A2, and A3 |
Do you have a AC/DC Current Clamp that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your AC/DC Current Clamp calibrated today! Click Here!
There are currently no reviews for this product.
