Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

APM SPS300VAC4500W - Single 3-Phase Output Programmable AC Power Supply

Single 3-Phase Output Programmable AC Power Supply

APM

Category : Three Phase AC Source System

$13,750 (USD) Add to Cart

Documents:
Datasheet APM Full Catalog Users Manual

Overview
Features
Information
Calibration

APM Three phase AC source system is a single 3-phase output programmable AC power supply which provides with high power density. With high speed DSP+CPLD control, high frequency PWM technology, active PFC design, It is able to provide not only stable DC/AC output power,but also 3-phase / 1-phase output. It is featured with high power density, high reliability and high precision, meanwhile it possesses operation interface of touch screen and keys manually. It is able to analog output normal or abnormal power input for electrical device to meet test requirements, which is applicable to electric, lighting, aviation sectors, etc. It could be applied to enterprise's production test as well. This series is applicable to multiple sectors such as electric, lighting and aviation sectors and it could be applied to enterprise's production test as well. 

  • 4.3" large touch color screen, possess complete functions and easy to operate.
  • AC+DC mixed or independent output mode for voltage DC offset simulation.
  • Capable of setting voltage and current output restriction, support for constant current output mode.
  • Capable of setting output slope of voltage and frequency.
  • Capable of setting ON/OFF phase angle.
  • With reverse current protection to avoid current flowing backward.
  • Built-in power meter, which is capable of measuring 5 electrical parameters per phase, including voltage, current, power, etc. 

Input

Voltage100~265VAC
Frequency47~63Hz
Phase3 Phase, 4Wire + Ground/Y Connect
Max.Current57A
Power Factor at 220VAC Input, Full Load≥0.98 Active PFC
Efficiency>87.5% (Peak) >87% at 220VAC,5OHz input/220VAC,50Hz output,Full Load

3-Phase Output Mode

AC Power(Per Phase)1500VA
AC Power(Total)4500VA
Max. Current (r.m.s.)
0~150V(L)13.8A
0~300V(H)6.9A
Max. Current (peak)
0~150V(L)82.8A
0~300V(H)41.4A

Parallel Output Mode

Max. Current (r.m.s.)
0~150V(L)41.4A
0~300V(H)20.7A
Max. Current (peak)
0~150V(L)248.4A
0~300V(H)124.2A
Phase1 Phase

Output

Total Harmonic Distortion (THD)<0.5% (Resistive Load) at 15.0-70.OHz and output voltage within the 80-14OVAC Low Range or the 160-28OVAC at High Range <1% (Resistive Load) at 70.1-5OOHz and output voltage within the 80-14OVAC at Low Range or the 160-28OVAC at High Range <1% (Resistive Load) at 501-lOOOHz and output voltage within the 100~14OVAC at Low Range or the 160-28OVAC at High Range
Crest Factor(CF)≤ 6
Load Regulation±0.2%F.S. (Resistive Load) at 15~100Hz ±0.5%F.S. (Resistive Load) at >100Hz
Line Regulation±0.1V
Voltage(AC) (L-N)
Range0~300VAC, 150V/300V/Auto Mode
Resolution0.1V
Accuracy0.2% of setting +0.4%F.S at Voltage>3V
Phase Angle (Starting/Ending)
Range0~359°
Resolution0.1°
Accuracy±1° @45~65Hz
Voltage(DC)
Range0~424VDC
Resolution0.1V
Accuracy0.3% of setting +0.4%F.S at Voltage >3V
DC Power (Per Phase)1500W
Max. Current (Per Phase)
L9.76A
H4.88A
DC Power (Total)4500W
Max. Current (Total)
L29.28A
H14.64A
Ripple & Noise (Peak)L <700mVrms @Bandwidth 20Hz to 1MHz H <1100mVrms @Bandwidth 20Hz to 1MHz
Ripple & Noise (r.m.s.)<4000mVp-p @Bandwidth 20Hz to 1MHz
Current OC Fold Mode
Resolution0.01A
Accuracy0.5% of setting +1.0%F.S.
Response Time<1400ms
Frequency
Range15~1000Hz
Resolution0.1Hz(15.0~99.9Hz), 1Hz(100~1000Hz)
Accuracy0.03% of setting
Programmable Output ImpedanceNot Supported
Harmonic & Inter Harmonics SimulationNot Supported

Measurement

Voltage (Per Phase)
Range
AC0~300VAC
DC0~424VDC
Resolution0.1V
Accuracy0.2% of setting +0.4%F.S. (Peak: 0.6% of setting +1%F.S.)
Frequency (Per Phase)
Range15~1000Hz
Resolution0.1Hz(15.0~99.9Hz) ,1Hz(100-1000Hz)
Accuracy0.1% of setting
Current (r.m.s) (Per Phase)*
Range
H0.3A~13.8A
L0.1A~3A
Resolution0.01A
Accuracy0.4%+1.0%F.S.
Current (Peak) (Per Phase) *
Range0A~82.8A
Resolution0.01A
Accuracy0.4%+1.5F.S.
Power (Per Phase)
Range0~1530W
Resolution0.1W
Accuracy0.4% of setting + 0.3%F.S. at PF>0.2, Voltage > 5V
Power Apparent(VA) (Per Phase)
Range0~1530VA
Resolution0.1VA
AccuracyVoltage * 1rms, Calculated value
Power Resistive (VAR) (Per Phase)
Range0~1530VAR
Resolution0.1VAR
Accuracy√((VA)² - (W)²) , Calculated value
Power Factor (PF)
AccuracyW/VA, Calculated Value
Resolution0.01
Range0.00~1.00
Harmonic RangeNot Supported

Extra Function

Slew Rate
Range
AC Voltage0.001~1200.000 V/ms and Disable
DC Voltage0.001~1000.000V/ms and Disable
Frequency0.001~1600.0002z/ms and Disable
Remote Sense
Range5V(rms), Max. Total power less than rated power
CalibrationFirmware-based calibration through the digital interface or front panel display
Test FunctionNot Supported
Graphic Display4.3" Color touch LCD
Operation Key FeatureSoft key, Numeric key, Rotary Knob, Support USB disk
Rack mount HandlesYes
FanTemperature Controlled
Protection CircuitsOCP, OVP, OPP, OTP, RCP, PRI_UVP, PRI_OVP, PRI_OTP, PRI_OCP, USB_OCP
InterfaceUSB, RS485, RS232, LAN(Option), GPIB(Option)

Environmental

Operating Temperature0°C to 40°C
Storage Temperature-40°C to 85°C
Altitude2000m
Relative Humidity5%-95%, non-condensing
Temperature Coefficient100ppm/°C at Voltage, 300ppm/°C at Current, 100ppm/°C at Frequency

Mechanical

Dimensions(W*H*D)540mm * 400mm * 640mm
Package Dimensions (W*H*D)660mm * 575mm *800mm
Unit Net Weight88.7kg
Accessories Weight0.4kg
Gross Weight108.7kg

Regulatory Compliance

CE MarkInstallation Overvoltage Category II ; Class II equipment; indoor use only.

Do you have a Single 3-Phase Output Programmable AC Power Supply that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your Single 3-Phase Output Programmable AC Power Supply calibrated today! Click Here!