Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

APM SYS75VDC24000W - 24000W Programmable DC Power System

24000W Programmable DC Power System

APM

Category : Power Supplies

by quote only Add to Cart

Documents:
Datasheet

Overview
Features
Information
Calibration

Wide range automatic switch range mode

In the limit of constant output power, range of voltage and current could automatically switch which allow to output high voltage and low current at the same time as well as output low voltage and high current at the same time. It provides wider range in output. With only one unit, it could realize multi voltage and current combination which significantly increase use ratio.

 

Multiple choice of communication interface

Standard interface of this series include LAN, USB, RS485, RS232 and GPIB(OPTION). It support SCPI command that make it more convenient in using.

 

Multi-protection function, safe and reliability

Built-in OVP has faster response. Over voltage value could custom setting. When output voltage is higher than setting protection value, it will shut down power source immediately. You could feel safe to use. At the meanwhile, it contain OCP and OTP, which could perfectly protect you, load.  


Support remote sensing and voltage compensation

This series is equipped with remote compensation interface, which could directly connect to load to compensate voltage drop because of lone time connect. It could make sure load acquire accurate voltage values.

  • With accurate voltage and current measurement capability
  • Coded knobs, multifunctional keyboard
  • Standard RS232/LAN/RS485/USB interface, Optional for GPIB
  • Remote sensing to compensate for voltage drop in load leads
  • Support CV and CC automatically switch
  • Function of editing List waveform
  • Use SCPI commands
  • CE certified
  • OVP/OCP/OPP/OTP/SCP

 

Regulatory Compliance

CE MarkInstallation Overvoltage Category II; Class II equipment; indoor use only.

 

Mechanical

Shipping Weight160kg + 15kg * 6 (REF)
Accessories Weight0.4kg
Unit Net Weight100kg + 15kg * 6 (REF)
Package Dimensions (mm)720W x 1160H x 820D
Dimensions (mm)600W x 963H x 700D

 

Environmental

Temperature Coefficient100ppm/˚C at Voltage, 300ppm/˚C at Current
Relative Humidity10%-90%, non-condending
Altitude2000m
Storage Temperature-20˚C~70˚C
Operating Temperature0˚C~40˚C

 

Remote Control Input/Output Signal Characteristics

Remote Output SignalNot Supported
Remote Input SignalNot Supported

 

Extra Function

InterfaceUSB, RS485, RS232, LAN(Standard), GPIB(Option)
Protection CircuitsOCP, OVP, OPP, OTP, FAN
FanTemperature Control
Rack Mount HandlesYes
Operation Key Featuresoft keys, numeric keys, rotary knob
Graphic DisplayVFD
Comm. Respondence.50ms
Remote Sense (Range)5V(DC), Max. Total power less than rated power

 

Measurement

Current Setting
Accuracy0.1% + 0.10% F.S.
Resolution10mA
Range0~360A
Voltage Setting
Accuracy0.05% + 0.05% F.S. at 75Vdc < Output Voltage =< 1200Vdc
Accuracy0.1% + 0.1 F.S. at 0< Output Voltage =< 75Vdc
Resolution0.1mV
Range0~75V

 

Output

Ripple
Current
TYP Value30mA
Full Range180mA
Voltage80mVp-p/16mVrms
Current Setting
Accuracy0.1% + 0.10% F.S.
Resolution10mA
Range0~180A
Voltage Setting
Accuracy0.05% + 0.05% F.S. at 75Vdc < Output Voltage =< 1200Vdc
Accuracy0.1% + 0.1% F.S. at 0< Output Voltage =< 75Vdc
Resolution0.1mV
Range0~75V
Line Regulation
Current0.02% F.S. + 15mA
Voltage0.02% F.S. + 30mV
Load Regulation
Current0.36A
Voltage240mV
Output Power24kW Max
Output Current0~360A
Output Voltage0~75V

 

Input

Efficiency>88% Max @ Full Load and Units = 4kW Model
Power Factor @ 220VAC Input (Full Load)0.98Min. Active PFC
Input Power Max28.5kW
Max. Current150A
Phase3 Phase, 4 Wire + Ground / Y Connect
Frequency47~63Hz
Voltage190~265VAC

Do you have a 24000W Programmable DC Power System that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your 24000W Programmable DC Power System calibrated today! Click Here!