Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

Soken DAC-MR-100A - CONTACT RESISTANCE METER

CONTACT RESISTANCE METER

Soken

Category : Resistance Meter

by quote only Add to Cart

Documents:
Brochure

Overview
Features
Specifications
Calibration

SOKEN Contact Resistance Meter, DAC-MR-100A, and DAC-MR-50A are ideal for measurement at both laboratory and on-site test instantly and easily with the resolution 0.1 micro ohm. DAC-MR-100A is for measuring current 100A, and DAC-MR-50A is for 50A.

 

Application

  • Contact Resistance Measurement for Power Circuit Breaker (GIS, Switch Gear)
  • Resistance Measurement for Bus Bar and Joint
  • Conductive Resistance Measurement for Cables

 

Principle

 

A standard resistor Rs is introduced into the resistance meter as in the circuit diagram. A common current Is flows to both the resistor Rs and a specimen Rx under test. Thus, voltage drop generates separately: IsRs=Es for Rs, IsRx=Ex for Rx. The measured voltages, Es and Ex are divided in the dividing circuit.

Ex/Es=IsRx/IsRs=Rx/Rs

A ratio of Rx/Rs is given digitally.

 

Connection 

Soken DAC-MR-100A - CONTACT RESISTANCE METER
  • Light and Durable, only about 8 kg
  • Measuring Current 100A and 50A
  • Resolution:0.1 μ ohm
  • Kelvin Clips for Quasi Four Terminal Measurements

 

General

Measuring Range0-1.9999 m ohm
Measuring CurrentDC100A±3%
Minimum Resolution0.1µ ohm
Accuracy±(0.5%Rdg+3digits) at 1/10 of full scale or more
±(0.5%Rdg+10digits) at 1/10 of full scale or less
Measuring Current Output1.000V/100A
Display4 1/2 digit (Max 1.9999)
Power Consumption800VA
AC MainsAC 100V~ 240V±10% 50/60Hz
SizeW305 x H245 x D250 (mm)
Weight8.4 kg
Accessories4 terminals Measuring Cable (5M) with Kelvin Clip x 1
set AC Cord (2M) x 1
Grounding Cable (2M) x 1
Operation Manual x 1
Accessory Bag x 1

Do you have a CONTACT RESISTANCE METER that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your CONTACT RESISTANCE METER calibrated today! Click Here!