GW Instek GPT-15001 - AC 500VA AC Withstanding Voltage Electrical Safety Analyzer
GW Instek introduces the flagship model (500VA output capacity) safety analyzer-the GPT-15000 series, which is the first safety analyzer in the world to comply with IEC 61010-2-034 (Safety requirement for electrical requirement for measurement, control and laboratory use – particular requirements for measurement equipment for insulation resistance and test equipment for electric strength), which stipulates that the requirements of the software and hardware interfaces must be followed while designing high voltage and insulation resistance test and measurement instruments so as to ensure that users are provided with necessary protection and warning while using the instruments.
Analyze Your Safety Tests
- Meets IEC 61010-2-034 design requirements
- High Accuracy and High Resolution Testing Performance
- Flexible supplementary testing mechanism
- Statistic and analysis
- Sweep and tabular automatic test
- Complete test data retrieval interface
- 500VA AC Test Capacity (short circuit current > 200 mA)
- Comply with IEC 61010-2-034
- 7”TFT LCD
- Manual / Auto Mode
- RMS Current Measurement
- Zero Crossing Turn-on Operation
- Controllable Ramp-up & Ramp-down Time
- Capacitive Load Testing Capability up to 47μF
- Statistics & Analysis Function
- Sweep Function for DUT Characteristic Analysis
- Convenience Listed AUTO mode easy to read result & judge
- Internal Storage & USB Storage available
- Barcode Function available
- Setting Data Export / Import
- Rear panel output available
- Interface : RS-232C, USB host/device, Signal I/O and option GPIB or LAN
- Universal power input
General
| AC Withstanding | √* |
| DC Withstanding | ----- |
| Insulation Resistance | ----- |
| Ground Bond | ----- |
| Ground Continuity | √ |
| Display | 7" color LCD |
| Power Source | AC 100V~240V ± 10%, 50Hz/60Hz |
| Dimension & Weight | 380(W) x 148(H) x 492(D) mm; Approx. 17kg |
* : Short current > 200mA
AC Withstanding
| Output-Voltage Range | 0.050kV~5.000kV |
| Output-Voltage Resolution | 1V |
| Output-Voltage Accuracy | ± (1% of setting + 5V) [no load] |
| Maximum Rated Load | 500 VA (5kV/100mA) |
| Maximum Rated Current | 100mA (0.5kV< V ≦5kV) 10mA (0.05kV≦ V ≦0.5kV) |
| Output-Voltage Waveform | Sine Wave |
| Output-Voltage Frequency | 50 Hz / 60 Hz selectable |
| Voltage Regulation | ± (1% + 5V) [maximum rated load → no load] |
| Voltmeter Accuracy | ± (1% of reading + 5V) |
| Current Measurement Range | 1μA~100.0mA |
| Current Best Resolution | 1μA / 10μA / 100μA |
| Current Measurement Accuracy | ± (1.5% of reading + 30μA) |
| Window Comparator Method | Yes |
| ARC Detect | Yes |
| RAMP UP (Rise Time) | 0.1s~999.9s |
| RAMP DOWN (Fall Time) | 0.0s~999.9s |
| TIMER (Test Time)* | OFF, 0.3s~999.9s |
| TIMER Accuracy | ± (100ppm + 20ms) |
| WAIT TIME | 0.0s~999.9s |
| GND | On / Off |
* When Ground Mode is “ON”, the measurement range is 30GΩ max. and adding 10% error for accuracy.
DC Withstanding
| Output-Voltage Range | 0.050kV~6.000kV |
| Output-Voltage Resolution | 1V |
| Output-Voltage Accuracy | ± (1% of setting + 5V) [no load] |
| Maximum Rated Load | 100W (5kV/20mA) |
| Maximum Rated Current | 20mA (0.5kV< V ≦6kV) 2mA 0.05kV≦ V ≦0.5kV) |
| Voltage Regulation | ± (1% + 5V) [maximum rated load → no load] |
| Voltmeter Accuracy | ± (1% of reading + 5V) |
| Current Measurement Range | 1μA~20.00mA |
| Current Best Resolution | 0.1μA /1μA /10μA |
| Current Measurement Accuracy | ± (1.5% of reading + 3μA) when I Reading < 1mA ± (1.5% of reading + 30μA) when I Reading ≧1mA |
| Current Offset | 5μA Maximum |
| Window Comparator Method | Yes |
| ARC Detect | Yes |
| RAMP UP (Rise Time) | 0.1s~999.9s |
| RAMP DOWN (Fall Time) | 0.0s~999.9s |
| TIMER (Test Time)* | OFF, 0.3s~999.9s |
| TIMER Accuracy | ± (100ppm + 20ms) |
| WAIT TIME | 0.0s~999.9s |
| GND | On / Off |
* When Ground Mode is “ON”, the measurement range is 30GΩ max. and adding 10% error for accuracy.
Insulation Resistance
| Output Voltage | 50V~1200V dc |
| Output-Voltage Resolution | 50V |
| Output-Voltage Accuracy | ± (1% of setting + 5V) [no load] |
| Test Voltage | Display Range | Measurement Range / Accuracy |
|---|---|---|
| 50V≦V≦100V | 0.1MΩ~ 10.00GΩ | 0.1MΩ~1MΩ：±(5% of reading + 3 count) 1 MΩ~50MΩ：±(5% of reading + 1 count) 51MΩ~2GΩ：±(10% of reading + 1 count) |
| 150V≦V≦450V | 0.1MΩ~ 20.00GΩ | 0.1MΩ~1MΩ：±(5% of reading + 3 count) 1 MΩ~50MΩ：±(5% of reading + 1 count) 51MΩ~2GΩ：±(10% of reading + 1 count) |
| 500V≦V≦1200V | 0.1MΩ~ 50.00GΩ | 0.1MΩ~1MΩ：±(5% of reading + 3 count) 1 MΩ~500MΩ：±(5% of reading + 1 count) 501MΩ~9.999GΩ：±(10% of reading + 1 count) 10GΩ~50GΩ：±(20% of reading + 1 count)* |
| Voltage Regulation | ± (1% + 5V) [maximum rated load → no load] |
| Voltmeter Accuracy | ± (1% of reading + 5V) |
| Short-Circuit Current | 10mA max. |
| Output Impedance | 2kΩ |
| Window Comparator Method | Yes |
| RAMP UP (Rise Time) | 0.1s~999.9s |
| RAMP DOWN (Fall Time) | 0.0s~999.9s |
| TIMER (Test Time)* | OFF, 0.3s~999.9s |
| TIMER Accuracy | ± (100ppm + 20ms) |
| Wait Time | 0.0s~999.9s |
| GND | On / Off |
* When Ground Mode is “ON”, the measurement range is 30GΩ max. and adding 10% error for accuracy.
Ground Bond
| Output-Current | 03.00A~32.00A ac |
| Output-Current Resolution | 0.01A |
| Output-Current Accuracy | 3A≦ I≦ 8A：±(1% of reading + 0.2A) 8A |
| Test-Voltage | 8Vac max (open circuit) |
| Test-Voltage Frequency | 50Hz/60Hz selectable |
| Ohmmeter Measurement Range | 1mΩ~ 650mΩ |
| Ohmmeter Measurement Resolution | 0.1mΩ |
| Ohmmeter Measurement Accuracy | ± (1% of reading + 2 mΩ) |
| Window Comparator Method | Yes |
| TIMER (Test Time) | 0.3s~999.9s |
| TIMER Accuracy | ± (100ppm + 20ms) |
| Test Method | Four Terminal |
| GND | On / Off |
Continuity Test
| Output-Current | 100mA dc (fixed) |
| Ohmmeter Measurement Range | 0.10Ω~ 70.00Ω |
| Ohmmeter Measurement Resolution | 0.01Ω |
| Ohmmeter Measurement Accuracy | ± (10% of reading + 2Ω) |
| Window Comparator Method | Yes |
| Timer (Test Time)* | 0.3s~999.9s |
| Timer Accuracy | ± (100ppm + 20ms) |
* When Ground Mode is “ON”, the measurement range is 30GΩ max. and adding 10% error for accuracy.
Memory
| Single Step Memory | MANU：100 blocks |
| Automatic Testing Memory | AUTO：100 blocks, manu per auto：10 |
Interface
| REMOTE (Front) terminal | Standard |
| USB host (Front) | Standard |
| Rear Output | Standard |
| RS-232C | Standard |
| USB device | Standard |
| Signal I/O | Standard |
| GPIB | Option |
| LAN | Option |
Do you have a AC 500VA AC Withstanding Voltage Electrical Safety Analyzer that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your AC 500VA AC Withstanding Voltage Electrical Safety Analyzer calibrated today! Click Here!
There are currently no reviews for this product.
Recommended Accessories for the AC 500VA AC Withstanding Voltage Electrical Safety Analyzer
RS-232C Cable, 9-pin, F-F Type, null modem, 2000mm
GPIB Card
GHT- HV Test Pistol
