GW Instek GOS-653G - 50MHz, 2 Channel, Oscilloscope with Delayed Sweep
Instek GOS-653G: 50MHz, Dual Channel - Delayed Sweep (GOS-653G) - Built-In Delay Line (GOS-653G) - TV Synchronization - CH1 Output - Z Axis Input - ALT Triggering Function - Hold Off Function - Trigger Level Lock Function - 6-inch rectangular type with internal graticule 0%, 10%, 90% and 100% markers. 8 x 10 div (1div=1cm) 310(W) x 150(H) x 455(D)mm; Approx. 8.2kg - AC 100V/120V/220V/230V /- 10%, 50Hz/60Hz
This product has been discontinued. Our replacement recommendation is the GOS-6051 - GW Instek 50MHz Readout Analog Oscilloscope with Cursor Measurement and Frequency Counter
- 50 MHz, Dual Channel
- Delayed Sweep
- Built-in Delay Line
- TV Synchronization
- Z axis input
- ALT Triggering Function
- Hold off Function
- Trigger level lock function
- CH1 output
| SPECIFICATIONS | ||
|
|
Type |
|
| Phosphor | P31 | |
| Accelerating Potential | 12 kV | |
| Illumination | Continuously adjustable | |
| Z-axis input | Input Impedance : Approx. 5kΩ | |
| Sensitivity : Above 3Vp-p | ||
| Bandwidth : DC ~ 5MHz | ||
|
|
||
|
VERTICAL SYSTEM |
Sensitivity | 5mV ~ 5V/DIV +3%, 1mV ~ 2mV/DIV +5% |
| Bandwidth | DC ~ 50MHz | |
| DC ~ 15MHz at 1mV ~ 2mV/DIV | ||
| Rise Time | 7nS (23.3nS at 1mV ~ 2mV/DIV) | |
| Signal Delay | Leading edge can be monitored | |
| Input Impedance | Approx. 1MΩ | |
| Input Coupling | AC, DC, GND | |
| Vertical Mode | CH1, CH2, DUAL, CH2 INV, ADD.(Dual automatic switching ALT and CHOP) | |
|
|
||
|
HORIZONTAL SYSTEM |
A (main) Sweep Time | 0.1µS ~ 0.5S / DIV+3%, 100nS ~ 50mS / DIV+5% (x 10MAG), 10nS ~ 50nS/DIV+8% (x 10MAG) |
| B (delay) Sweep Time | 0.1µS ~ 0.5mS / DIV+3%, 100nS ~ 50µS / DIV+5%(x 10MAG), 10nS ~ 50nS / DIV+8% (x 10MAG) |
|
| Delay Time | 1µS ~ 5mS, +5% | |
| Delay Time Jitter | Better than 1:10000 | |
|
|
||
|
TRIGGER |
Trigger Mode | AUTO, NORM, SINGLE |
| Trigger Source | CH1, CH2, ALT, LINE, EXT | |
| Trigger Coupling | AC, DC, HR, REJ, TV | |
| Trigger Slope | + or - | |
|
|
||
|
X-Y OPERATION |
Sensitivity | 5mV ~ 5V / DIV+ 4% |
| X-axis Bandwidth | DC ~ 2MHz | |
| Phase Error | 3º or less from DC ~ 100kHz | |
|
|
||
|
OUTPUT SIGNAL |
Trigger Signal Output | Voltage : approx. 50mV / DIV into 50Ω |
| Calibrator Output | 1kHz Squarewave, 2Vpp+2% | |
|
|
||
| POWER SOURCE | AC 100V / 120V / 220V / 230V + 10%, 50 / 60Hz | |
|
|
||
| ACCESSORIES | Power cord x 1; Instruction manual x 1 ; Probes(10:1/1:1)x2 |
|
|
|
||
| DIMENSIONS & WEIGHT | 310(W) x 150(H) x 455(D) mm；Approx. 8.2kg | |
Do you have a 50MHz, 2 Channel, Oscilloscope with Delayed Sweep that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your 50MHz, 2 Channel, Oscilloscope with Delayed Sweep calibrated today! Click Here!
There are currently no reviews for this product.
Recommended Accessories for the 50MHz, 2 Channel, Oscilloscope with Delayed Sweep
BNC Cable, BNC(P/M)-BNC(P/M)
