Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

APM CSP8 - Control & Supervisory Panel for SPS-M/A Series DC Power Supply System

Control & Supervisory Panel for SPS-M/A Series DC Power Supply System

APM

Rated 0 / 5 (0 reviews)

Category : Control & Supervisory Panel

by quote only add to cart

Documents:
Datasheet

Pricing displayed is for budgetary planning only. Please call us at (905) 660-3797 or click on "add to cart" for a formal competitive quotation

Overview
Features
Specifications
Calibration

Front Panel Introduction

  1. Emergency Stop, physically off all managed DC power supplies at once.
  2. CSP power switch
  3. Color touch screen
  4. Selection soft keys
  5. Voltage/Current & Power knob
  6. Numeric and functional keys
  7. USB port, for data transfers and firmware upgrading
  8. Stylus
  1. RS485/RS232/USB communication interface (standard), LAN & GPIB communication interface (optional), CAN communication interface (optional)*
  2. External TTL/Analog control interface.
  3. System Bus, for master/slave system data transmission
  4. Termination resistor CAN-R
  5. PDU AC output terminals to each DC power supply
  6. FAN & EMS AC input terminals
  7. PDU AC input terminals
  8. Protective earth (ground) terminals
  • CSP5/CSP8*, connect with 5units /10 units 3U height DC power supply or 2units /5 units 6U height DC power supply.
  • Built-in power meter, to monitor the AC mains parameters such as V, A, Frequency, Power and PF.
  • Support efficiency calculation and electrical quantities recording.
  • Built-in Timer, allows to set output running time.
  • Easy to enable the output of each power supply from the touch screen, sequence On/Off DC power supplies.
  • Display the output parameters of each DC power supply in the same system.
  • PDU significantly simplifies the wiring for DC power system.
  • Use-defined AC input protection parameters such as OVP, UVP, OFP, UFP, OCP and Phase loss.
  • Provide web GUI function to monitor & control the CSP via Ethernet.

* Even the same model CSP may be configured differently, which is based on the connected DC power supplies.

 

Control Unit: 1~10 (3U Height Unit)

Input
Input Voltage Range (L-L) [1]187···305VAC
Rated Voltage (L-L) [1]340···480VAC
Input Frequency Range45-65Hz
Wires3ph, PE
Max Current [1]
800A208V Input
400A400V Input
Max Power230kVA
Timer Setting
Power OFF TimerDDD/HH/MM
Sequential Control Settings
Power ON SequenceFrom the first Slave unit to the last Slave unit
Power OFF SequenceAll slave units Power Off at the same time
ON/OFF ControlManual/Timer/Remote
Power Meter
Voltage(L1/L2/L3)
Range180~460VAC
Resolution0.01V
Accuracy± 0.2%
Frequency
Resolution0.01Hz
Accuracy± 0.2%
Current(L1/L2/L3)
Range0~800A
Resolution0.01A
Accuracy± 0.8%
Power
Resolution0.001kW
Accuracy± 1.5%
Power Factor
Resolution0.01
Accuracy± 1%
Protection
OVP+10% of Nominal Input
UVP-10% of Nominal Input
OCP+10% of Max. Input Current
OFP/UFP50Hz±5Hz/60Hz±5Hz
Phase LossAlarm and stop operation when lose any phase
Safety
Emergency StopMultiple rack cabinet EMS can be connected in series; Extendable EMS switch
General Specification
Controller Power Supply
Input Voltage187···253VAC
Input Voltage340···460VAC
Frequency45-65Hz
Power Consumption55W
Standby Power28W
Graphic Display4.3'' Color touch LCD
Operation Key FeatureSoft keys, Numberic keys, Rotary knod, USB port for transfer and upgrading firmware
InterfaceRS232/RS485/USB(Standard), GPIB & LAN(Optional), CAN(Optional)
Command Response Time3ms
Environmental
Operating Temperature0~40°C
Storage Temperature-20~70°C
Temperature Coefficient<95%RH(non-condensing)@35°C, <80%RH(non-condensing)@40°C
Relative Humidity<2000m
Cooling MethodForced air cooling
Mechanical
Dimensions(WxHxD)423.0 x 353.0 x 578.0 mm
Unit Weight28kg
Withstanding Voltage
Primary - ChassisDC 2121V
Primary - SecondaryDC 4242V
Secondary - ChassisDC 2121V

 

Control Unit: 1~5 (6U Height Unit )

Input
Input Voltage Range (L-L) [1]/
Rated Voltage (L-L) [1]340···480VAC
Input Frequency Range45-65Hz
Wires3ph, PE
Max Current [1]800A@208V Input
400A@400V Input
Max Power230kVA
Timer Setting
Power OFF TimerDDD/HH/MM
Sequential Control Settings
Power ON SequenceFrom the first Slave unit to the last Slave unit
Power OFF SequenceAll slave units Power Off at the same time
ON/OFF ControlManual/Timer/Remote
Power Meter
Voltage(L1/L2/L3)
Range180~460VAC
Resolution0.01V
Accuracy± 0.2%
Frequency
Resolution0.01Hz
Accuracy± 0.2%
Current(L1/L2/L3)
Range0~800A
Resolution0.01A
Accuracy± 0.8%
Power
Resolution0.001kW
Accuracy± 1.5%
Power Factor
Resolution0.01
Accuracy± 1%
Protection
OVP+10% of Nominal Input
UVP-10% of Nominal Input
OCP+10% of Max. Input Current
OFP/UFP50Hz±5Hz/60Hz±5Hz
Phase LossAlarm and stop operation when lose any phase
Safety
Emergency StopMultiple rack cabinet EMS can be connected in series
Extendable EMS switch
General Specification
Controller Power Supply
Input Voltage187···253VAC
340···460VAC
Frequency45-65Hz
Power Consumption60W
Standby Power28W
Graphic Display4.3'' Color touch LCD
Operation Key FeatureSoft keys, Numberic keys, Rotary knod, USB port for transfer and upgrading firmware
InterfaceRS232/RS485/USB(Standard), GPIB & LAN(Optional), CAN(Optional)
Command Response Time<3ms
Environmental
Operating Temperature0~40°C
Storage Temperature-20~70°C
Temperature Coefficient<95%RH(non-condensing)@35°C, <80%RH(non-condensing)@40°C
Relative Humidity<2000m
Cooling MethodForced air cooling
Mechanical
Dimensions(WxHxD)423.0 x 353.0 x 578.0 mm
Unit Weight28kg
Withstanding Voltage
Primary - ChassisDC 2121V
Primary - SecondaryDC 4242V
Secondary - ChassisDC 2121V

[1] For different input voltage standard option must be specified at the time of order as they are installed at the factory prior to shipment.


Do you have a Control & Supervisory Panel for SPS-M/A Series DC Power Supply System that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your Control & Supervisory Panel for SPS-M/A Series DC Power Supply System calibrated today! Click Here!

 

There are currently no reviews for this product.

 

Review the APM CSP8 - Control & Supervisory Panel for SPS-M/A Series DC Power Supply System

Control & Supervisory Panel for SPS-M/A Series DC Power Supply System

Name :

Email :

Title :

Review: