GW Instek PEL-504-500-15 - 350W 500V/15A Programmable DC Load
Overview
Features
Specifications
Calibration
The PEL-500 series single-channel electronic load has a total of 5 models and provides 0~80V/ 0~500V voltage operating ranges and 250~700W power operating range. The series can be applied to R&D, quality control, ATE system and production test, including voltage source/current source test; switching power supply transient response; constant voltage mode for current limiting test; battery simulation; and battery discharge test.
- 5-digit digital voltage, current and power meter
- Simultaneous display of voltage, current, and watts
- Short-circuit time can be set during short-circuit test
- Automatic test function of overcurrent protection/overpower protection
- The battery discharge test function can set the discharge stop voltage (Vbatt), discharge capacity (AH, WH) and stop discharge time.
- Surge test can simulate boot overshoot current and transient current from hot plugging.
- Constant current, constant resistance, constant voltage, constant power and Dynamic mode
- Overvoltage, overcurrent, over power, over temperature protection and reverse polarity detection
- Voltage polarity display can be set to positive value ("+") or negative value ("-")
- Communications interface: RS232, USB
Input Ratings
| Power(Watt) | 350 W |
| Current(Ampere) | 15 A |
| Voltage(Volt) | 500 V |
| Min. Operating Voltage | 6V @ 15A |
Protections
| Over Power Protection(OPP) | ≒367.5W |
| Over Current Protection(OCP) | ≒15.75A |
| Over Voltage Protection(OVP) | ≒525V |
| Over Temp. Protection(OTP) | YES |
CC Mode
| Range | 0~1.5~15A |
| Resolution | 0.025mA/0.25mA |
| Accuracy | ±0.1% of (SETTING + RANGE) |
CR Mode
| Range | 0.4~40~2400000Ω |
| Resolution | 666.667µΩ /0.416µSiemens |
| Accuracy | ±0.2% of (SETTING + RANGE) |
CV Mode
| Range | 0~60~500V |
| Resolution | 1mV/10mV |
| Accuracy | ±0.05% of (SETTING + RANGE) |
CP Mode
| Range | 0~35.04~350.4W (Imax=r1:7A, r2:70A) |
| Resolution | 0.584mW/5.84mW |
| Accuracy | ±0.5% of (SETTING + RANGE) |
Dynamic Mode
| THIGH/TLOW | 10µS to 9.999 Sec |
| Resolution | 0.001/0.01/0.1/1mS |
| Slew rate (L) | 1~62.5mA/µs |
| Slew rate (H) | 10~625mA/µs |
| Accuracy | ±5%±10µs |
Measurement
| Voltage Read Back |
| ||||||||||
| Current Read Back |
| ||||||||||
| Power Read Back |
| ||||||||||
Surge Test
| Surge & Normal current | 0~15A |
| Surge time | 10~1000ms |
| Surge step | 1~5 |
Battery Discharge Test
| UVP | 0~500V |
| Time | 1~99999 Sec |
| Capacity | 0.1~19999.9AH/0.1~19999.9WH |
Other
| Load ON Voltage | 0.4~100V |
| Accuracy | 1% of (SETTING + RANGE) |
| Load OFF Voltage | 0~100V |
| Accuracy | 0.05% of (SETTING + RANGE) |
| Imonitor (Non-isolated) | 1.5 A/V |
| Current Monitor | Full scale: 10V |
| Accuracy | 0.5% of (SETTING+ RANGE) |
| Typical Short Resistance | 0.367Ω |
| Max. short Current | 15A |
| Power input | 115/230 Vac±10%, 50/60Hz |
| Interface (Standard) | USB/RS232 |
| Power Consumption | 40 VA |
| Dimension (HxWxD) | 205 x 123 x 477mm |
| Weight | 5.3kg |
Do you have a 350W 500V/15A Programmable DC Load that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your 350W 500V/15A Programmable DC Load calibrated today! Click Here!
There are currently no reviews for this product.
Recommended Accessories for the 350W 500V/15A Programmable DC Load
RS-232 Cable, 9 pin, M-F Type, 1000mm
USB Cable, USB 2.0, A-B Type, 1200mm
