Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

GW Instek GSP-8130TG - 9KHz ~ 3.8GHz Spectrum Analyzer with TG

9KHz ~ 3.8GHz Spectrum Analyzer with TG

GW Instek

Rated 0 / 5 (0 reviews)

Category : Spectrum Analyzers

by quote only add to cart

Documents:
Datasheet

Overview
Features
Specifications
Calibration

The GSP-8000 series, brand new general spectrum analyzers from GW Instek, features three frequency ranges, namely 8.0GHz, 3.8GHz and 1.8GHz. The series is suitable for teaching research, R&D verification, and the test requirements of radio frequency products during production and development stages. The series provides 1Hz ~ 1MHz resolution bandwidth (RBW), 10Hz ~ 3MHz video bandwidth (VBW), -104dBc/Hz phase noise, a 20dB preamplifier, and the lowest noise floor of -160dBm/Hz (typical).

With respect to measurement applications, GSP-8000 has built-in Time Spec function, AM/FM signal demodulation function, channel test (Channel Power Measurement) function, Pass-Fail function, etc. The Time Spec function can simultaneously observe and display the correlation between power, frequency, and time. ACPR/OCBW/CHPW tests can be used to test adjacent channels, power occupation bandwidth ratio, and channel power. The Pass-Fail function can be used to determine whether the signal is within the set range. Users can use these functions to conduct a wide range of measurement applications.

GSP-8000 utilizes a 10.4-inch TFT LCD large-size screen with XGA (1024*768) resolution to allow an easy observation of test signals. For communication interface, GSP-8000 provides two interfaces: USB and LAN. Through the USB Host, users can quickly retrieve the files stored after measurements, while USB Device and LAN interface allow users to control the instrument through dedicated PC software, or use the corresponding command set to design the required program.

GSP-8000 also provides two options, namely TG and EMI Filter. Customers need to decide the TG function when placing an order. Other options can be activated through the corresponding software authorization (Soft-Key), which greatly improves usage efficiency.

  • Frequency Range:
  • - GSP-8800: 9kHz ~ 8.0GHz
  • - GSP-8380: 9kHz ~ 3.8GHz
  • - GSP-8180: 9kHz ~ 1.8GHz
  • RBW: 1Hz ~ 1MHz in 1-3-5-10 steps
  • VBW: 10Hz ~ 3MHz in 1-3-5-10 steps
  • Phase Noise: -104 dBc/Hz
  • Sensitivity: -160dBm/Hz Typical @PreAmp On
  • Built-in AM/FM Demodulation
  • Built-in Time Spec Function
  • Measurement Function: ACPR/OCBW/CHPW, NdB BW, Pass-Fail, Freq. Counter, Noise Marker
  • Built-in 20dB Preamplifier
  • Communication Interface: LAN, USB Host/Device
  • Display: 10.4" XGA Output (1024*768)
  • Options: Tracking Generator, EMI Filter

 

Frequency

Range9 kHz ~ 3.8 GHz
Resolution1 Hz

 

Frequency Span

Span Range0 Hz, 100 Hz to max. frequency of instrument
Span Uncertainty±span / (sweep points-1)

 

Internal Frequency Reference

Frequency Range10.000000 MHz
Reference Frequency Accuracy±[(days from last calibrate × freq aging rate) + temperature stability + initial accuracy]
Temperature stability<1ppm (15°C ~ 35°C)
Aging rate<1ppm/year
Initial Accuracy< 1ppm

 

SSB Phase Noise

Offset from Carrier
- fc = 1 GHz, RBW = 1 kHz, VBW = 1kHz, 20°C ~ 30°C, average ≥ 40
10 kHz< -104 dBc/Hz
100 kHz< -106 dBc/Hz (Typical)
1 MHz< -115 dBc/Hz (Typical)

 

Bandwidth

Resolution Bandwidth1Hz to 1MHz (1-3-5-10 steps by sequence)
200Hz, 9kHz, 120kHz, 1MHz, EMI Filter(6dB), Optional
RBW Uncertainty< 5%, Typical, RBW ≤ 1 MHz
Resolution Filter Shape Factor
(60dB: 3dB)		< 5: 1, Typical, digital and close to Gaussian shape
Video Bandwidth (VBW)10 Hz ~ 3 MHz

 

Amplitude

Amplitude and Level
Amplitude measurement rangeDANL ~ +10 dBm, 100 kHz ~ 1 MHz, Preamp Off
DANL ~ +20 dBm, 1 MHz ~ 3.8 GHz, Preamp Off
Reference Level-80 dBm ~ +30 dBm, 0.01dB by step
Preamp20 dB, 100 kHz ~ Max. Frequency Range
Input Attenuation0 ~ 40 dB, in 1 dB step
Max Input DC Voltage50 VDC
Max continuous power+30dBm, Average continuous power
Displayed Average Noise Level (DANL)
Preamp Off9 kHz ~ 1MHz, <-95 dBm (typical), <-88dBm
1 MHz ~ 1 GHz, <-140dBm (typical), <-130 dBm
1 GHz ~ 3.8 GHz, <-138dBm (typical), <-128 dBm
Preamp On
- Input Attenuation = 0 dB, ref. level ≥ -60dBm, trace average ≥ 40, RBW normalizes to 1Hz, DETECTOR = SAMPLE, RBW = 100Hz, VBW = 100Hz
- 100 kHz ~ 1MHz, <-135 dBm (typical), <-128dBm
1 MHz ~ 1 GHz, <-160dBm (typical), <-150 dBm
1 GHz ~ 3.8 GHz, <-160dBm (typical), <-150 dBm
Frequency Response
Filter Bandwidth20°C to 30°C, 30% to 70% relative humidity, input attenuation = 10 dB, reference frequency = 50 MHz, SPAN = 200KHz, RBW = 10KHz, VBW = 10KHz
Preamp Off, fc ≥100 kHz±0.8 dB, 100K ~ Max. Frequency Range
Preamp On, fc ≥1MHz±0.9 dB, 100K ~ Max. Frequency Range
Uncertainty and Accuracy
RBW Switch UncertaintyReference: 10 kHz RBW at Frequency Center is 50 MHz
±0.2 dB, Log resolution
Input Attenuation Uncertainty20°C ~30°C, fc=50 MHz, Preamplifier Off, 10 dB RF attenuation,RBW = 10K,
1 ~ 40 dB ±0.5 dB
Absolute Amplitude Uncertainty
-20°C to 30°C, fc = 50 MHz, Span = 200 kHz, RBW = 10 kHz, VBW=10 kHz, peak detector, 10 dB RF attenuation, average ≥ 20, 2db/div, 95% confidence level
Preamp Off±0.4 dB, input signal level -20 dBm
Preamp On±0.5 dB, input signal level -40 dBm
Uncertainty20°C to 30°C, fc ≥ 1MHz, signal input range 0 ~ -50dBm, Ref Level range 0 ~ -50dBm, 10 dB RF attenuation, RBW = 1kHz, VBW = 1kHz, Preamp Off
±1.5 dB(typical)
VSWR<1.5, Nominal, Input 10 dB RF attenuation, 1MHz ~ 3.8GHz
Distortion and Spurious Response
Second harmonic distortionfc ≥ 50 MHz, Preamp off, signal input -20 dBm, 0 dB RF attenuation, 20°C ~ 30°C
-65 dBc
Third-order intermodulationfc ≥ 50 MHz, Input double tone level -20 dBm, frequency interval 100 kHz, input attenuation 0 dB, preamplifier off, 20°C ~ 30°C
+10 dBm
1 dB Gain CompressionNominal, fc ≥ 50 MHz, 0 dB RF attenuation, Preamp off , 20°C ~ 30°C
> -2 dBm
Residual responseConnect 50 Ω load at input port, 0 dB input attenuation, 20°C to 30°C, average ≥ 40, RBW = 300Hz, VBW = 3kHz, SPAN = 2M
<-85 dBm, 1 MHz ~ Max. Frequency Range
Input related spurious<-60 dBc, -30 dBm signal at input mixer, 20°C ~ 30°C

 

Sweep

Sweep Time
Range10 ms ~ 3000 s, None-zero Span
1 ms ~ 3000 s, Zero Span
Sweep ModeContinuous; Single

 

Tracking Generator (option 01)

Tracking Generator Output
Frequency Range100 kHz ~ Max. Frequency Range
Output power level range-40 dBm ~ 0 dBm
Output power level resolution1 dB
Output flatness± 3 dB
Maximum safe reverse levelAverage total power: +30 dBm, DC : ±50 VDC
Impedance50 Ω, Nominal
ConnectorN Type Female

 

Frequency Counter

Resolution1Hz, 10Hz, 100Hz, 1kHz
Accuracy±(frequency indication × frequency reference accuracy) + counter resolution

 

Inputs and Outputs

RF Input
Impedance50 Ω, Nominal
ConnectorN Type Female
Reference Input
ConnectorBNC Female
10MHz Reference Amplitude0 dBm to +10 dBm
Trigger Input
Impedance1 kΩ
10MHz Reference AmplitudeBNC Female
USB
USB Host
ConnectorA Plug
ProtocolUSB 2.0 (Host End)
USB Device
ConnectorB Plug
Protocol2.0 Version

 

General

Display
TypeTFT LCD
Resolution1024*768
Size10.4 inches
Color65,536 colors
Remote Control
USB DeviceB Plug, supports USB TMC
LAN TCP/IP InterfaceRJ-45, supports 10Base-T/100Base-Tx,
Mass MemoryMass Memory
Temperature
Operating Temperature0 °C to 40°C
Storage Temperature-20°C to 70°C
Relative humidity
0°C to 30°C≤ 95%
30°C to 40°C≤ 75%
Power consumption28W
Dimensions & Weight421(W) × 221(H) × 115(D) mm; Approx. 5.0 kg (without package)
AC Power Socket100V ~ 240V, 50/60Hz

Do you have a 9KHz ~ 3.8GHz Spectrum Analyzer with TG that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your 9KHz ~ 3.8GHz Spectrum Analyzer with TG calibrated today! Click Here!

 

There are currently no reviews for this product.

 

Review the GW Instek GSP-8130TG - 9KHz ~ 3.8GHz Spectrum Analyzer with TG

9KHz ~ 3.8GHz Spectrum Analyzer with TG

Name :

Email :

Title :

Review: