GW Instek GPT-15012 - Electrical Safety Analyzer
GW Instek introduces the high DC voltage model of safety analyzer : the GPT-15012, which is the safety analyzer to comply with IEC 61010-2-034 (Safety requirement for electrical requirement for measurement, control, and laboratory use – particular requirements for measurement equipment for insulation resistance and test equipment for electric strength), which stipulates that the requirements of the software and hardware interfaces must be followed while designing high voltage and insulation resistance test and measurement instruments to ensure that users are provided with necessary protection and warning while using the instruments.
Due to the high voltage output characteristics of GPT-15012, it is particularly suitable for the safety testing requirements of various high-voltage insulation products, such as energy storage/photovoltaic components, high-voltage relays, wires and cables, etc.
Analyze Your Safety Tests
- High Voltage output DC 12kV
- Meets IEC 61010-2-034 design requirements
- High Accuracy and High Resolution Testing Performance
- Flexible supplementary testing mechanism
- Statistic and analysis
- Sweep and tabular automatic test
- Complete test data retrieval interface
- DC 12kV / IR 5kV
- Comply with IEC 61010-2-034
- 7”TFT LCD
- Manual / Auto Mode
- RMS Current Measurement
- Zero Crossing Turn-on Operation
- Controllable Ramp-up & Ramp-down Time
- Capacitive Load Testing Capability up to 47μF
- Statistics & Analysis Function
- Sweep Function for DUT Characteristic Analysis
- Convenience Listed AUTO mode easy to read result & judge
- Internal Storage & USB Storage available
- Barcode Function available
- Setting Data Export / Import
- Rear panel output available
- Interface : RS-232C, USB host/device, Signal I/O and option GPIB or LAN
- Universal power input
DC Withstanding
| Output-Voltage Range | 0.050kV~12.00kV |
| Output-Voltage Resolution | 1V |
| Output-Voltage Accuracy | ± (1% of setting + 5V) [no load] |
| Maximum Rated Load | 120W (12kV/10mA) |
| Maximum Rated Current | 10mA (0.5kV< V ≦12kV) 2mA (0.05kV≦ V ≦0.5kV) |
| Voltage Regulation | ±(1% + 5V) [maximum rated load → no load] |
| Voltmeter Accuracy | ±(1% of reading + 5V) |
| Current Measurement Range | 1μA~10.00mA |
| Current Best Resolution | 0.1μA /1μA /10μA |
| Current Measurement Accuracy | ±(1.5% of reading + 3μA) when I Reading < 1mA ±(1.5% of reading + 30μA) when I Reading ≧1mA |
| Current Offset | 5μA Maximum |
| Window Comparator Method | Yes |
| ARC Detect | Yes |
| RAMP UP (Rise Time) | 0.1s~999.9s |
| RAMP DOWN (Fall Time) | 0.0s~999.9s |
| TIMER (Test Time) | OFF, 0.3s~999.9s |
| TIMER Accuracy | ±(100ppm + 20ms) |
| WAIT TIME | 0.0s~999.9s |
| GND | ON/OFF |
Insulation Resistance
| Output Voltage | 50V~5000V dc | ||||||||
| Output-Voltage Resolution | 50V | ||||||||
| Output-Voltage Accuracy | ± (1% of setting + 5V) [no load] | ||||||||
| Resistance Display | Resistance Display | ||||||||
| Resistance Measurement |
| ||||||||
| Voltage Regulation | ±(1% + 5V) [maximum rated load → no load] | ||||||||
| Voltmeter Accuracy | ± (1% of reading + 5V) | ||||||||
| Short-Circuit Current | 10mA max. | ||||||||
| Output Impedance | 2kΩ | ||||||||
| Window Comparator Method | Yes | ||||||||
| RAMP UP (Rise Time) | 0.1s~999.9s | ||||||||
| RAMP DOWN (Fall Time) | 0.0s~999.9s | ||||||||
| TIMER (Test Time) | OFF, 0.3s~999.9s | ||||||||
| TIMER Accuracy | ±(100ppm + 20ms) | ||||||||
| WAIT TIME | 0.0s~999.9s | ||||||||
| GND | ON/OFF |
General
| Memory |
| ||||||||||||||||
| Interface |
| ||||||||||||||||
| Display | 7” color LCD | ||||||||||||||||
| Power Source | AC 100V~240V ± 10%, 50Hz/60Hz Power consumption : 400VA max. | ||||||||||||||||
| Dimension & Weight | 380(W) x 148(H) x 492(D) mm; Approx. 9.8kg |
* NOTE: It is required to implement GND OFFSET action when IR Ground Mode is “ON”.
When IR Ground Mode is “ON”, 50V~1200V the maximum 30GΩ, 1250V~5000V the maximum 10GΩ measurement range is guaranteed.
When IR Ground Mode is “ON”, test time starts from 0.5 second.
Do you have a Electrical Safety Analyzer that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your Electrical Safety Analyzer calibrated today! Click Here!
There are currently no reviews for this product.
Recommended Accessories for the Electrical Safety Analyzer
USB Cable, USB 2.0, A-B Type, 1200mm
Clip High Voltage Probe, 1M
RS-232C Cable, 9-pin, F-F Type, null modem, 2000mm
