Your Cart
(empty)
0
Tradeport Electronics
measurement is our business
Cart : (empty)

GW Instek GSG-2160 - RF Signal Generator (GPIB)

RF Signal Generator (GPIB)

GW Instek

Rated 0 / 5 (0 reviews)

Category : Signal Generators

by quote only add to cart

Documents:
Brochure Datasheet

Overview
Features
Specifications
Calibration

The GSG-2000 series is a basic RF vector signal/ signal generator that covers a frequency range from 9 kHz to 6 GHz. It is suitable for applications in communications education, RF component testing (such as amplifiers, antennas, and filters), automotive electronic signal testing, and IoT applications. It meets the testing requirements of RF products during production and development stages.

 

 

Compared to its main competitors, the GSG-2000 series offers superior specifications including a wide amplitude output range of +20 dBm to -140 dBm, lower phase noise of -117 dBc/Hz, and high frequency accuracy with 10 ppm frequency stability and 2 ppm aging rate. Users have the option to enhance frequency stability and aging rate by selecting the OCXO (Oven Controlled Crystal Oscillator) option, which provides 10ppb stability and 0.1 ppm aging rate.

For the signal modulation, the entire series has built-in AM, FM, and PM analog modulation, and GSG-2160 features a digital signal modulation function with a maximum bandwidth of 60 MHz digital signal output, supporting ASK, PSK, APSK, QAM, FSK, MSK, User-defined IQ, User-defined FSK modulation signals.

Furthermore, the GSG-2000 series also provides LF signal and Pulse signal output. The LF signal allows users to output Sine, Square, Triangle/Ramp, Gaussian Noise signals, and the Pulse signal output can simulate pulse wave applications of various widths. In addition to the above signal outputs, GSG-2000 also provides AM/FM/digital IQ signal input, as well as independent output ports for digital I or Q signals.

GSG-2000 adopts a seven-inch TFT LCD display that can fully display the parameters and status set by the user, and the series also provides USB, LAN, GPIB (option) communications interfaces, and provides standard SCPI-compatible commands to support remote control . GSG-2000 is designed for 3U high standard rack size.

 

The GSG-2000 series is available in two models and the main differences are shown in the following table:

 

GSG-2160

GSG-2060

Frequency range

  9 kHz~6 GHz

 9 kHz~6 GHz

Analog modulation

AM, FM, PM

Digital modulation

ASK, PSK, APSK, QAM, FSK, MSK,
User-defined IQ, User-defined FSK

N/A

LF output

V

Pulse output

V

 

  • Frequency range: 9 kHz ~ 6 GHz
  • Frequency resolution: 1 mHz
  • Standard 10 ppm frequency stability, 2 ppm aging rate
    • Optional AUX (OCXO): 10 ppb frequency stability, 0.1 ppm aging rate
  • Amplitude range: -140 dBm to +20 dBm
  • 0.01 dBm amplitude setting resolution
  • Amplitude setting unit: dBm, dBµV, Vrms
  • Phase noise: <-117 dBc/Hz (real) @1 GHz output and 20 kHz offset
  • The sampling speed of digital modulation signal (I/Q) output reaches 180MSa/s
  • Frequency/amplitude switching speed: ≤ 5 ms
  • Built-in LF/RF signal output, Pulse signal output
  • The series has built-in AM, FM, PM analog signal modulation functions
  • Supports IQ modulation signal output (GSG-2160 only)
    • Up to 60 MHz baseband I or Q modulation signal output
    • Up to 120 MHz RF I+Q modulation signal output
    • Built-in ASK, PSK, APSK, QAM, FSK, MSK, self-defined IQ/FSK digital signal modulation functions
  • Provides USB, LAN and GPIB (option), commands comply with SCPI standards

 

Frequency Range (9kHz ~ 6GHz)

Frequency Resolution1mHz
Frequency Bands
Freequency Bands
Frequency Switching≦5ms

 

SSB Phase Noise, CW at 20kHz Offset (dBc/Hz)

Frequency (MHz)
ALC On
5-
100-112
250-112
1000-112
2000-108
3000-107
6000-102
ALC Off
5-122
100-115
250-117
1000-117
2000-112
3000-110
6000-105
Residual FM (0.3kHz ~ 3kHz)(1GHz CW)<2Hz

 

Non Harmonics

ALC On
Level > -10dBm, Offset > 10kHz<-65dBc
<-66dBc,-70dBc(typ)
<-75dBc
<-70dBc,-74dBc(typ)
<-62dBc,-66dBc(typ)
<-58dBc,-60dBc(typ)
ALC Off
Level > -10dBm, Offset > 10kHz1M freq. 5M
5M < freq. 187.5M
187.5M < freq.< 750M
750M freq. < 1500M
1500M freq. < 3000M
3000M freq. < 6000M

 

Harmonics

Range Level < 4dBm
9k Freq < 6000M<-35dBc

 

Frequency Reference

Frequency Reference10MHz
9k Freq < 6000M<-35dBc
Output1Vpp, 50 Ohm Load
ALC On
Temperature Stability<10ppm, Standard
Aging2ppm/year, Standard
Input DeviationStandard: 3ppm
ALC Off
Temperature Stability<10ppb, OCXO Option
Aging0.1ppm/year, OCXO Option
Input DeviationOCXO Option: 0.5ppm

 

Amplitude Specifications

Amplitude
Setting Range20dBm ~ -140dBm
ResolutiondBm, dBμV, Vrms
Amplitude Accuracy
Absolute Level Accuracy in CW Mode (ALC On)
9k < freq. < 3GHz
14dBm to -60dBm±0.6dB
-60dBm to -90dBm±0.8dB (±0.6dB typical)
-90dBm to -110dBm±1dB (±0.7dB typical)
3GHz < freq.< 6GHz
14dBm to -60dBm±0.8dB
-60dBm to -90dBm±1dB (±0.6dB typical)
-90dBm to -110dBm±1.2dB (±0.7dB typical)
Addition Level Accuracy in CW Mode (ALC Off, Power Search Run, Relative to ALC On)0.15dB
VSWR (5M ~ 3GHz)<1.8 (output -66dBm)
Amplitude Switching (ALC on, CW)≦5ms

 

Sweep Specifications - Sweep

ModeFrequency, amplitude, list
Dwell Time100μs ~ 100s
Number of Points (Step)2 ~ 65,535
Number of Points (List)1 ~ 4,096
TriggeringFree, trigger key, external, timer

 

Analog Modulation Specifications

FM
SourceInternal, external
Max. DeviationN*1MHz
Rate
freq ≧ 10MHz0.1Hz ~ 1MHz
freq < 10MHz0.1Hz ~ 100kHz
Resolution1mHz
Accuracy (1kHz rate, N*50kHz deviation)2% setting + 20Hz
Distortion (1kHz rate, N*50kHz deviation )0.40%
PM
SourceInternal,external
Max. DeviationN* 1MHz/rate or 5N rad
Rate
freq ≧ 10MHz0.1Hz ~ 1MHz
freq < 10MHz0.1Hz ~ 100kHz
Resolution0.001rad
Accuracy (1kHz rate)1% of setting+0.1rad
Distortion (1kHz rate, max deviation)0.20%
Response0.1Hz ~ 1MHz
AM
Sourceinternal, external
Resolution0.01%
Depth0 ~ 100%
Accurcay (1kHz, 0dBm)
<5MHz1.5% setting +1%
5M ~ 4GHz3% of setting+1%
4GHz ~ 6GHz5% of setting + 1%
Distortion (1kHz, 80%, <8dBm)
<5MHz1.50%
5M ~ 4GHz2%
4GHz ~ 6GHz3%
Response0.1Hz ~ 20kHz

 

Pulse Specifications - Pulse

ModeFree-run, square, triggered, adjustable doublet, trigger doublet, gated, pulse train, and external pulse
SourceInternal,external
Pulse Input-0.5V ~ 5V, VIL=VIH=1.5V (typ)
Edge Time<20ns
On/Off Ratio70dB, 5M ~ 3GHz
45dB, 3G ~ 6GHz
Repitition Rate0.1Hz ~ 10MHz
Pulse Period100ns ~ 42s
Resolution10ns
Width50ns ~ period-10ns
Pulse Train Number of Patterns2047

 

LF Specifications - LF

WaveformSine, square, triangle, ramp, gaussian noise
Frequency Range
Sine0.1Hz ~ 10MHz
Square, Triangle, Ramp0.1Hz ~ 1MHz
Gaussian Noise10MHz BW
Resolution1mHz
Output2mVpp ~ 6Vpp
Impedance50 Ohm

 

Vector Modulation Specifications (GSG-2160 only)

SourceInternal, external
Bandwidth (baseband)60MHz
Bandwidth (RF)120MHz
Carrier Frequency<5MHz ~ 6,000MHz
Carrier Suppression (25±5°C)>50dBc
Sideband Suppression (25±5°C)>50dBc
Modulation ModeASK, PSK, APSK, QAM, FSK, MSK, user define IQ, user define FSK
ASK2ASK(0 ~ 100%), 4ASK, 8ASK, 16ASK, 32ASK
PSKBPSK, QPSK, DQPSK, OQPSK, π/4 DQPSK, 8PSK, D8PSK, 16PSK
APSK16APSK, 32APSK
QAM16QAM, 32QAM, 64QAM, 128QAM, 256QAM
FSK2FSK, 4FSK, 8FSK, 16FSK
Internal Modulation EVM
(16QAM, RRC filter,α=0.25, 4Msps, level≦4dBm,ALC off)
0.8%, 10MHz < freq < 3GHz
1.2%, 3GHz < freq < 5GHz

 

IQ Generator

Resolution16bit
Sample Rate10kHz ~ 180MHz
Baseband Bandwidth60MHz
ARB Memory
Waveform Length16Msa
Storage Capacity16GB
Trigger TypeFree, single, gated, trigger and run
Trigger SourceExternal, trigger key

 

Internal IQ Adjustment

IQ Offset±10%
IQ Gain±6dB
IQ Skewmax 30ps ~ 100ps

 

External IQ Output

Impedance50Ohm per output
Maximum per Output0.5Vpk
Bandwidth60MHz
Common Mode Offset±1.25V
Differential Mode Offset±50mV

 

External IQ Input

Bandwidth60MHz
Full Scale±1V into 50Ohm
IQ Offset±10% full scale
IQ Gain±6dB

 

Simultaneous Modulation

-All modulation types (I/Q, FM, AM, ΦM, and pulse modulation) may be simultaneously enabled except: FM and phase modulation

 

General Specifications

Power SourceAC 100 ~ 240V, 50 ~ 60Hz
Power Consumption90VA Maximum
Display7 inch TFT LCD, 1024(RGB)*600
InterfaceGPIB (option), USB, LAN
Operating Temperature0 ~ 50°C
Storage Temperature-10 ~ 70°C
Humidity85% at 40°C
AltitudeUp to 2000m
Dimensions (W x H x D) & Weight430(W) x 140(H) x 540(D)mm ; Approx. 13 kg

Do you have a RF Signal Generator (GPIB) that needs to be calibrated?

We offer standard traceable calibration and ISO 17025 accredited calibration services.

Get your RF Signal Generator (GPIB) calibrated today! Click Here!

 

There are currently no reviews for this product.

 

Review the GW Instek GSG-2160 - RF Signal Generator (GPIB)

RF Signal Generator (GPIB)

Name :

Email :

Title :

Review: