GW Instek GDS-2104 - 100MHz 4CH Digital Storage Oscilloscope
Overview
Features
Specifications
Calibration
Instek GDS-2104: Bandwidth:100MHz 4 Input Channels ** Applications : Education Lab. and Training Institution Production Test and Quality Inspection Repair and After-Service Circuit Design and Debug
This product has been discontinued. Our replacement recommendation is the GDS-2104E - GW Instek 100MHz, 4-Channel, Digital Oscilloscope
Vertical
Channels | 4 |
Bandwidth |
DC ~ 100MHz (-3dB) |
Rise Time | 3.5ns Approx. |
Sensitivity | 2mV/div ~ 5V/div (1-2-5 increments) |
Accuracy | ±(3% x |Readout|+0.05 div x Volts/div+0.8mV) |
Input Coupling | AC, DC & Ground |
Input Impedance | 1MΩ±2%, ~16pF |
Polarity | Normal & Invert |
Maximum Input | 300V (DC+AC peak), CATII |
Waveform Signal Process | + , - , FFT |
Offset Range |
2mV/div ~ 20mV/div : ±0.5V 50mV/div ~ 200mV/div : ±5V 500mV/div ~ 2V/div : ±50V 5V/div : ±300V |
Bandwidth Limit | 20MHz (-3dB) |
Trigger
Sources | CH1 , CH2 , CH3 , CH4 , Line |
Modes | Auto-Level, Auto, Normal, Single, TV, Edge, Pulse Width |
Coupling | AC , DC , LF rej. , HF rej. , Noise rej. |
Sensitivity | DC ~ 25MHz : Approx. 0.5div or 5mV 25MHz ~ 200MHz : Approx. 1div or 10mV |
Horizontal
Range | 1ns/div ~ 10s/div (1-2-5 increments) ROLL : 250ms/div ~ 10s/div |
Modes | Main, Window, Window Zoom, Roll, Scan, X-Y |
Accuracy | ±0.01% |
Pre-Trigger | 20 div maximum |
Post-Trigger | 1000 div |
X-Y Mode
X-Axis Input | Channel 1 |
Y-Axis Input | Channel 2 |
Phase Shift | ±3° at 100kHz |
Signal Acquisition
Real-Time Sample Rate | 1GSa/s maximum |
Equivalent Sample Rate | 25GSa/s maximum |
Vertical Resolution | 8 Bits |
Record Length | 25K Points maximum |
Acquisition Mode | Normal, Peak Detect, Average |
Peak Detection | 10ns |
Average | 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 |
Cursors & Measurement
Voltage Measurement | Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot |
Time Measurement | Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle |
Delay Measurement | Eight types of delay measurement |
Cursors Measurement | Voltage difference between cursors (ΔV) Time difference between cursors (ΔT) |
Auto Counter |
Resolution : 6 digits |
Control Panel Function
Autoset | Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level |
Save Setup | Up to 20 sets of measurement conditions |
Save Waveform | 24 sets of waveform |
Display
TFT LCD Type | 5.6 inch |
Display Resolution | 234 (Vertically) x 320 (Horizontally) Dots |
Display Graticule | 8 x 10 divisions ; 8 x 12 divisions (menu off) |
Display Brightness | Adjustable |
Inteface
Go/NoGo Output | 5V Maximum/10mA TTL Open Collector Output |
RS-232 Interface | DB 9-pin male DTE RS-232 interface |
GPIB Interface (Option) | Fully programmable with IEEE 488.2 compliance |
USB | USB Host/Device 2.0 full speed supported |
Power Source
Line Voltage Range | AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection |
Battery Power(Option) |
Battery : 10.8V Li-Ion battery pack Charge Time : 8 hours (Power ON) Operating Time : 3 hours , depending on operating condition |
Miscellaneous
Multi-Language Menu | Available |
Online Help | Available |
Time Clock | Time and Date, Provide the Date/Time for saved data |
Dimensions & Weight
310(W) x 142(H) x 254(D) mm; Approx. 4.3kg |
Do you have a 100MHz 4CH Digital Storage Oscilloscope that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your 100MHz 4CH Digital Storage Oscilloscope calibrated today! Click Here!
There are currently no reviews for this product.
Recommended Accessories for the 100MHz 4CH Digital Storage Oscilloscope
Soft Carrying Case for GDS-800 Series and GDS-2000 Series
USB Cable, USB 2.0, A-B Type, 1200mm
RS-232C Cable, 9-pin, F-F Type, null modem, 2000mm