GW Instek GDS-1102A - 100MHz Digital Storage Oscilloscope
Instek GDS-1102A: The GDS-1000A series provide a unique solution. Operating at 60, 100 or 150 MHz with a real-time sampling rate of 1GSa/s, the GDS-1000A employs MemoryPrime technology. Using MemoryPrime technology, the GDS-1000A is able to overcome the problems associated with memory constraints. Unlike traditional DSOs, high sample rates can be maintained over longer periods of time, without effecting performance. Coupled with the high resolution, 5.6” color TFT display, SD memory card support, user-friendly interface and USB remote control make the GDS-1000A series compellingly feature-rich. Furthermore, the GDS-1000A series provide a lifetime warranty program!
- 100MHz Bandwidths
- 1 GSa/s Real-Time Sample Rates Maximum, 25GSa/s Equivalent-Time
- 2Mega Point Record Length
- 2mV~10V Vertical Scale
- 1ns~50s Horizontal Range
- Up to 27 Automatic Measurements
- Versatile Math Functions + , -, x, FFT, FFTrms
- 5.6 TFT LCD Display
- USB Interface & SD Card Supported
- Multi-Language Support on Operation Menu & On-Screen Help
Vertical
| Channels | 2 |
| Bandwidth | DC~100MHz(-3dB) |
| Rise Time | <3.5ns Approx. |
| Sensitivity | 2mV/div ~ 10V/div (1-2-5 increments) |
| Accuracy | ±(3% x |Readout| + 0.1 div + 1mV) |
| Input Coupling | AC, DC & Ground |
| Input Impedance | 1MΩ±2%, ~15pF |
| Polarity | Normal & Invert |
| Maximum Input | 300V (DC+AC peak), CATII |
| Waveform Signal Process | + , - , x, FFT, FFTrms |
| Offset Range |
2mV/div ~ 50mV/div: ±0.4V 100mV/div ~ 500mV/div: ±4V 1V/div ~ 5V/div: ±40V 10V/div: ±300V |
| Bandwidth Limit | 20MHz (-3dB) |
Trigger
| Sources | CH1 , CH2 , Line , EXT |
| Modes | Auto, Normal, Single, TV, Edge, Pulse Width |
| Coupling | AC , DC , LF rej. , HF rej. , Noise rej. |
| Sensitivity | DC ~ 25MHz: Approx. 0.5div or 5mV; 25MHz ~ 150MHz: Approx. 1.5div or 15mV |
Ext. Trigger
| Range | ±15V |
| Sensitivity | DC ~ 25MHz : ~ 50mV ; 25M ~ 150MHz : ~100mV |
| Input Impedance | 1MΩ±2% , ~ 15pF |
| Maximum Input | 300V (DC AC peak) , CATII |
Horizontal
| Range | 1ns/div ~ 50s/div (1-2.5-5 increments); ROLL : 250ms/div ~ 50s/div |
| Modes | Main, Window, Window Zoom, Roll, X-Y |
| Accuracy | ±0.01% |
| Pre-Trigger | 10 div maximum |
| Post-Trigger | 1000 div |
X-Y Mode
| X-Axis Input | Channel 1 |
| Y-Axis Input | Channel 2 |
| Phase Shift | ±3°at 100kHz |
Signal Acquisition
| Real-Time Sample Rate | 1GSa/s maximum |
| Equivalent Sample Rate | 25GSa/s maximum |
| Vertical Resolution | 8 Bits |
| 2 Mega Points maximum | |
| Acquisition Mode | Normal, Peak Detect, Average |
| Peak Detection | 10ns (500ns/div ~ 10s/div) |
| Average | 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 |
Cursors & Measurement
| Voltage Measurement | Vpp ,Vamp ,Vavg ,Vrms ,Vhi ,Vlo ,Vmax ,Vmin ,Rise Preshoot/Overshoot ,Fall Preshoot/Overshoot |
| Time Measurement | Freq ,Period ,Rise Time ,Fall Time ,Positive Width ,Negative Width ,Duty Cycle |
| Cursors Measurement | Voltage difference between cursors (V) Time difference between cursors (T) |
| Auto Counter |
Resolution : 6 digits Accuracy: 2% Signal Source: All available trigger source except the Video trigger mode |
Adjustable Probe Compensation Signal
| Frequency Range | 1kHz ~ 100kHz, 1kHz/STEP |
| Duty Cycle Range | 5% ~ 95%, 5%/STEP |
Control Panel Function
| Autoset | Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically |
| Save Setup | Up to 15 sets of measurement conditions |
| Save Waveform | 15 sets of waveform |
Display
| TFT LCD Type | 5.6 inch |
| Display Resolution | 234(Vertically) x 320(Horizontally) Dots |
| Display Graticule | 8 x 10 divisions |
| Display Brightness | Adjustable |
Interface
| USB Slave Connector | USB1.1 & 2.0 full speed compatible (printers and flash disk not supported) |
| SD Card Slot | Image (BMP), waveform data (CSV), and setup (SET) |
Power Source
| Line Voltage Range | AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection |
Miscellaneous
| Multi-Language Menu | Available |
| Onscreen Help | Available |
Dimensions & Weight
| 310(W) x 142 (H) x 140(D)mm, Approx. 2.5kg |
Do you have a 100MHz Digital Storage Oscilloscope that needs to be calibrated?
We offer standard traceable calibration and ISO 17025 accredited calibration services.
Get your 100MHz Digital Storage Oscilloscope calibrated today! Click Here!
There are currently no reviews for this product.
