ISO 17025 Accredited Calibration Services
Tradeport Electronics offers ISO 17025 Accredited Calibration Services in our accredited laboratories. Our 17025 accredited calibration services are also available if you require on-site calibration or pick up service. Our Laboratory has been recognized by the American Association for Laboratory Accreditation (A2LA) and has granted our labs with the following scope of calibration. Our team of qualified technicians work in a controlled environment to ensure that their calculations are accurate. We measure the relative humidity and temperature on every calibration. To keep a consistent controlled environment, our environment equipment is calibrated on a monthly basis. Tradeport Electronics calibrates your equipment using performance test to give you the best possible results.
Our ISO/IEC 17025 Calibrators
Our ISO/IEC 17025 Calibration laboratory is equipped with 2 main calibrators (Fluke 5520A and Fluke 5700A). To ensure that all calculations are accurate, the calibrators are tested on a monthly basis. They are put through a series of test to check that they meet specifications and the results are documented. When you request a ISO 17025 calibration from us, you will see on the certificate which of the calibrators was used, the last date it was calibrated and its due date.
Certificate, Calculation Results and test instrument sticker
Every 17025 accredited calibration comes with your calibration results sheet displaying each specification, the Lo-limit and Hi-Limit of each specification and their results, the uncertainty percentage and if that specification has a “pass” or “fail”.
Every ISO 17025 calibration uses the Guardband technique as required by the standards of the accreditation.
With a successful calibration, you receive your certificate of calibration. The certificate includes all the necessary documentation for traceability. As displayed on the image, your certificate has your contact information, your instrument information, all information that was relevant to this calibration and technician signatures. Once calibrated, your instrument will be tagged with your calibration tag to remind you of the upcoming calibration date, calibration certificate number and our accredited certificate seal. We also add a void sticker on the void seal to prevent tampering.
Typical Five-Day Turnaround
No matter which calibration service option you choose, when you calibrate with Tradeport Electronics, you can expect prompt and responsive service, including a typical five-day turnaround on most instruments. If you require a faster turnaround time, we also offer priority services.