Introduction-PEL-5000G 4~6KW (4U, up to 1200V) DC Load

 

GW Instek PEL-5000G series single-channel electronic load provides 150V/ 600V/ 1200V models with a power range of 4kW~6kW. PEL-5000G has a total of 9 models featuring different combinations of power, voltage, and current. It can test and verify the specifications of batteries, electric vehicle chargers/charging stations and electric vehicle batteries. PEL-5000G supports parallel connection for same voltage specification and different power models. PEL-5000G can support up to 8 units connected in parallel to provide a maximum power of 48kW.

Power / Voltage	150V	600V	1200V
4kW	PEL-5004G-150-400 (400A)	PEL-5004G-600-280 (280A)	PEL-5004G-1200-160 (160A
5kW	PEL-5005G-150-500 (500A)	PEL-5005G-600-350 (350A)	PEL-5005G-1200-200 (200A)
6kW	PEL-5006G-150-600 (600A)	PEL-5006G-600-420 (420A)	PEL-5006G-1200-240 (240A)

 

• 5 digital V / A / W Meter can be displayed on Large LCD display simultaneously.
• Flexible CC, CR, CV, CP, CV + CL, CV + PL, Dynamic and short circuit operation modes.
• Not only CC, CR, and CP mode have parallel operation functions, but CV mode also has parallel operation functions.
• Surge Test mode for Capacitive load for current rising transient test.
• Voltage meter display can be configured as polarity positive(”+”)or negative (“-”).
• Master-slave control is up to 1 Master and 7 Slaves.
• Optional Interface: GPIB, RS232, USB, LAN.
• SEQ Load Mode's programmable function allows for ultra-high-speed step changes from 0.02 to 999000 ms in CC or CP mode.
• Provide battery BMS protection test function.
• Optional 9923 load current waveform generator to provide the battery actual discharge current waveform simulation.
• Built-in test modes include Battery Discharge, BMS, Short circuit, OCP, OPP test modes.
• Turbo mode can withstand up to 1.5 times the current and power electronic load within 2 sec. period, most fit BMS, Short circuit, OCP, OPP test.
• Protection against V, I, W, and °C.